this post was submitted on 15 Oct 2024
253 points (98.5% liked)

linuxmemes

21263 readers
506 users here now

Hint: :q!


Sister communities:


Community rules (click to expand)

1. Follow the site-wide rules

2. Be civil
  • Understand the difference between a joke and an insult.
  • Do not harrass or attack members of the community for any reason.
  • Leave remarks of "peasantry" to the PCMR community. If you dislike an OS/service/application, attack the thing you dislike, not the individuals who use it. Some people may not have a choice.
  • Bigotry will not be tolerated.
  • These rules are somewhat loosened when the subject is a public figure. Still, do not attack their person or incite harrassment.
  • 3. Post Linux-related content
  • Including Unix and BSD.
  • Non-Linux content is acceptable as long as it makes a reference to Linux. For example, the poorly made mockery of sudo in Windows.
  • No porn. Even if you watch it on a Linux machine.
  • 4. No recent reposts
  • Everybody uses Arch btw, can't quit Vim, and wants to interject for a moment. You can stop now.

  • Please report posts and comments that break these rules!

    founded 1 year ago
    MODERATORS
     
    you are viewing a single comment's thread
    view the rest of the comments
    [–] jawa21@lemmy.sdf.org 24 points 1 month ago (1 children)

    I still love the particular way that Garuda configures some things from the get go. I always knew it was Arch based and might break eventually. What I didn't expect was the stupid power button deciding that it doesn't want to work anymore.

    [–] ewigkaiwelo@lemmy.world 7 points 1 month ago (1 children)

    Yeah that kind of device failure is really frustrating, did you manage to make it work?

    [–] jawa21@lemmy.sdf.org 10 points 1 month ago (3 children)

    I did, by pushing really hard in random directions =/ I'm going to have to take it apart and clean things with a hope that it gets fixed. Until then, I'm going to have to only use sleep and not turn it off for real.

    [–] Petter1@lemm.ee 14 points 1 month ago* (last edited 1 month ago) (2 children)

    You can just yank it off and short the wires manually to boot ☝🏻🤓

    [–] jawa21@lemmy.sdf.org 11 points 1 month ago* (last edited 1 month ago) (1 children)

    instructions unclear: hooked the power button circuits up to a car battery and caused 2 battery fires

    [–] Petter1@lemm.ee 5 points 1 month ago

    Nice, now it is warm

    [–] anguo@lemmy.ca 4 points 1 month ago

    That's how I used to turn my tower on when I was a teenager. The motherboard was also outside of the tower, lying on a piece of bubble wrap on the floor. When playing an exciting game, we'd sometimes kick the graphics card out of place.

    [–] oce@jlai.lu 4 points 1 month ago (2 children)

    I got the power button of my laptop repaired at an electronics repair shop, you could try that. It has been running well for 8 years with Arch.

    [–] jawa21@lemmy.sdf.org 5 points 1 month ago (2 children)

    How much did it cost? This laptop needs other repairs.

    [–] aniki@lemmings.world 3 points 1 month ago (1 children)

    Honestly, momentary switches are the simplest of all circuits. The only hard part will be soldering a new one into the old leads. What laptop is it? I can look and see what I think.

    [–] jawa21@lemmy.sdf.org 1 points 1 month ago (1 children)
    [–] aniki@lemmings.world 4 points 1 month ago (1 children)

    I did a quick look and it doesn't look like the switch is directly on the motherboard so most likely there's a JST plug or something similar with wire leads that then hook into the switch and/or a daughter board. If it's just two wires into a JST plug you can replace the switch with anything similar or if you wanna be ghetto about it just touch the two wires together to make a short.

    You can probably get the exact switch if you look hard enough since almost everything but the exterior shell will be commodity components.

    Good luck!

    [–] jawa21@lemmy.sdf.org 1 points 3 weeks ago (1 children)

    I ordered a keyboard replacement. This thing is a serious pain. The power switch is directly part of the keyboard. Under that button is nothing but silver paint for the contacts, which had firmed a crack over time.

    The worst part? Above the keyboard is a thin piece of sheet metal. It is "riveted" on by melting a fee dozen plastic standoff that affixed the metal piece by melting the tips of them. I spent an hour carefully popping them off with a screwdriver. The replacement keyboard fits (good news!), but I have to carefully use a soldering iron to melt the tops of these pieces back into "rivets."

    On the plus side, I have upgraded the RAM and added a hard drive. If it POSTs at the end of this, I will have 16gb of RAM and a 4 to add, which will let me ditch the external drive.

    [–] aniki@lemmings.world 2 points 3 weeks ago

    Yikes! That's just about the worst case scenario. It's maddening the shortcuts companies play to save literally pennies. Sounds like you've at least solved the problem so hopefully the replacement and all that work is fruitful!

    [–] oce@jlai.lu 2 points 1 month ago

    I can't remember, but something negligible compared to the price of a thin laptop.

    [–] dwindling7373@feddit.it 3 points 1 month ago (1 children)

    I like how you felt the need to specify "with Arch".

    [–] oce@jlai.lu 3 points 4 weeks ago

    Because it participates in keeping an old laptop fast and up to date.

    [–] Voltage@sh.itjust.works 3 points 1 month ago (1 children)

    I rarely shutdown my laptop. Most days I just close lid when I am done and back to what I was doing next day instantly.

    [–] jawa21@lemmy.sdf.org 3 points 1 month ago

    I can't do the lid shutdown thing because the built-in screen also has serious issues. It is very finicky. I just use either the terminal or KDE's built-in feature to do it. I've really put this poor machine through hell.