homeassistant

14853 readers

4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Your recommendation for smart plug (sh.itjust.works)

submitted 1 month ago by Bronzie@sh.itjust.works to c/homeassistant@lemmy.world

48 comments fedilink hide all child comments

I'm tinkering with our ventilation over-pressure function in combination with an inline fan I run when 3D printing or soldering, to get the fumes and particulates out while simultaneously not creating a massive vacuum inside. The plan is to control it with MQTT from HA to a PLC that controls the ventilation via RS-485.

Therefore I'm looking for a simple but clean looking smart plug that I can integrate with HA to let me know when the fan is on (pulling power, actual wattage is irrelevant) to automatically enable this function.

I know Sonoff makes some, but I always prefer personal advice over random search results.
Preferably Zigbee or WiFi (offline) as I don't have any Matter/Z-wave hub/dongle. Compact design and black would be nice, but not a must. Stability and ease of setup matters more than added functionality.

Does anyone have any personal experience to share?
I'm grateful if you do. Thanks!

you are viewing a single comment's thread
view the rest of the comments

[–] shortwavesurfer@lemmy.zip 3 points 1 month ago

I am running a 550 watt air conditioner on mine and it works. From what I can tell, it seems to take about 2000 watts immediately at startup, which is ~17 amps. The plug I have is rated for 15 amps and it seems to be alright. So far anyway.