3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I picked this printer up with a bunch of filament for $60. The build plate was really loose so I took it apart and found that the bearings are loose within the plastic part. Not really sure what to do here. I might epoxy the bearings in place. I saw that there is a y axis linear rail upgrade for $40 but that seems like a waste of money.
When fixing a 3D printer always go for the proper solution right away, because you will eventually get tired of the wonky half-assed solution you've spent hours or days getting to perform properly and just go for the proper solution anyway. Save yourself the frustration, time, and wasted filament in failed prints and do it right the first time.