Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 1 year ago

MODERATORS

communick@selfhosted.forum

rglullis

Recommended UPS? (Eaton has been a disaster) (alien.top)

submitted 11 months ago by flac_rules@alien.top to c/homelab@selfhosted.forum

8 comments fedilink hide all child comments

I used to have a APC UPS, it worked fine for quite a few years but suddenly stopped working. I heard good things about Eaton, and bought one, but it has been a disaster to be honest. I use it on a fileserver, and the capacity should be good, but when i tried the new one from Eaton it cut power during startup, and restarted the machine several times, maybe some peak power thing, but the APC what 650VA, and the new one is 850VA and the APC worked fine. For some reason it caused some data loss, which is certainly a big drawback when preventing data loss is the main reason for having it in the first place. I had a power failure, and the Eaton seems to have handled shutting down the machine, but after the failure it trips the circuit when it is plugged in. Does anyone have some other UPS to recommend? As of know the UPSes has caused more power outages than just not having one.

you are viewing a single comment's thread
view the rest of the comments

[–] wwbubba0069@alien.top 1 points 11 months ago

What Eaton unit are you using?

I run hand full of Eaton 5P 750va in satellite network racks in the building. Those are good to 600w power delivery. No issues with them.

Put a meter like a Kill-a-Watt on that system and watch the power draw on start up. Might be worth hooking up another system to it as well and see if the problem persists. If it doesn't act up on the 2nd system, might be an issue with the PSUs for the 1st system and what killed the APC.