3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
Admittedly I started pretty early on with the commercially available ones and I'm sure things have improved since then but that was my experience. I was fighting it for weeks screwing with leveling and temps, I completely burned through one set of leveling screws and had to replace them before I gave up and took the extruder apart and constructed a jig to make sure the nozzles were even. After that I started getting better results. By comparison my brother was given the exact same model by a coworker of his and he gave up on it because he's just doesn't think about technical things the same way I do. When he got the bambu though he was able to just go with it because he didn't have to really troubleshoot anything.