this post was submitted on 31 May 2026
55 points (98.2% liked)

3DPrinting

22755 readers
269 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 3 years ago
MODERATORS
j4k3@lemmy.world
andypiper@lemmy.world
GrayBackgroundMusic@lemmy.zip
55
What 3D printer should I buy? (feddit.dk)
submitted 1 day ago by SorteKanin@feddit.dk to c/3dprinting@lemmy.world
41 comments fedilink hide all child comments
 

I feel conflicted. On the one hand, Prusa seems to be a good and reliable brand. On the other hand, it seems overpriced compared to the competitors. Bambu seems to be a no-go but mostly for ethical open source reasons, not for price or quality reasons. At the same time, I've seen this article that says Prusa is even falling back on their open source principles. But not sure how up to date that is any more.

If we look beyond Bambu or Prusa, there's a variety of smaller brands that I have trouble distinguishing. With these other brands, it's hard to tell whether they're worth anything or just cheap knockoffs.

If we do consider Prusa, there's also the question of MK4S vs Core One. The Core One is much more expensive, to the point where it is ridiculously expensive compared to the competitors. The MK4S is slightly cheaper, but it seems like Prusa is focused on the Core One development going forward, so I'd be slightly worried of being "left behind" with the MK4S.

What do you think? Which printer should you get in 2026? Or perhaps there is some upcoming release or something to wait for?

you are viewing a single comment's thread
view the rest of the comments
[–] sobchak@programming.dev 1 points 8 hours ago

I'm guessing the cheap, good quality, printers are cheap because they want to capture market share and enshitify (all the proprietary stuff they use is a hint).

I was looking for something to replace my old Creality CR10S a few months ago, Bambu and Qidi were tempting because of the price, but I didn't like how proprietary everything was. The Prusa Core One looked nice, but looks like they're going a little less "free" now with their Open Community License and locked boot loaders. I would have got a Troodon (Voron-derived pre-built printer), but they were out of stock. I settled on just getting a Formbot Voron kit. Took a very long time to build, but I'm very happy with it. I know the printer inside and out, so it's easy to debug, modify, or repair if I need to.

In my opinion, if you're already somewhat familiar with 3d printing, I'd build a Voron from a kit. If not, I'd get a Voron-derived pre-built like a Troodon or Sovol SV8 (I think the Sovol has a proprietary toolhead though). If you want an easy Apple-like experience, but still pretty "open," I'd get a Prusa.

If you think you're going to want to print higher-temp, warp-prone filaments like ABS/ASA/PA, I would not choose a bed-slinger (e.g. Mk4s), because they are harder to enclose nicely and take up a lot of space if enclosed. As one data-point, my core-xy Voron produces much higher quality prints (e.g. less artifacts) and is faster than my bedslinger CR10S.