this post was submitted on 27 Jun 2026
376 points (98.7% liked)
Funny
15392 readers
995 users here now
General rules:
- Be kind.
- All posts must make an attempt to be funny.
- Obey the general sh.itjust.works instance rules.
- No politics or political figures. There are plenty of other politics communities to choose from.
- Don't post anything grotesque or potentially illegal. Examples include pornography, gore, animal cruelty, inappropriate jokes involving kids, etc.
Exceptions may be made at the discretion of the mods.
founded 3 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
We have rooms like this where i work. Theyre for live monitoring jet engine tests so we can monitor 1000+ pieces of instrumention to make sure the engines running safe.
That said, that floor looks too nice to be in our kind of facility. But i imagine hes got to be monitoring something in live time. Each screen is probably dedicated to a sub-system so he knows if something turns yellow or red, he immediately knows what system it is, whats going on, and can call the test back to a "safe operation"
So how the heck do you use a mouse with that many screens?
Youre usually not actively using the mouse. You set up each window/module individually, on a normal set up, then when you get into a control room, you load them individually and fit them to a monitor to just look at. Theres probably 1 or 2 monitors that hes actively using. I see no actual test control equipment in the picture, so they likely have some communication method to the people with the actual controls.
Like for example, if this guys monitoring oil systems, hell be checking levels, pressure, temperature and all things bearings, hes likely got an entire set up to monitoring just the oil tanks, one for oil flows at different locations in the circuit, specific temperaute locations so that he knows if he has risk of ignition, those kind of things. If he notice oil tank levels getting low, he'll call for more oil. Someone else has the job of controlling the valves and refilling the oil. If it goes on too long, he can call out he suspects an oil leak, which could lead to a different operator throttling back on the engine, or even turning it off. If he sees that his bearing is over/under loaded, he can call for a different person running an air system or a completely different person running a gear box to load/unload the bearings.
If theyre not all in the same room, theyre usually on phones, walkie talkies, or instant messenger
You.. move it? And.. click?