this post was submitted on 05 Aug 2024

27 points (80.0% liked)

No Stupid Questions

35723 readers

1012 users here now

No such thing. Ask away!

!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)

Rule 1- All posts must be legitimate questions. All post titles must include a question.

All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.

Rule 2- Your question subject cannot be illegal or NSFW material.

Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.

Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.

Rule 4- No self promotion or upvote-farming of any kind.

That's it.

Rule 5- No baiting or sealioning or promoting an agenda.

Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.

Rule 6- Regarding META posts and joke questions.

Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.

On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.

If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.

Rule 7- You can't intentionally annoy, mock, or harass other members.

If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.

Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.

Rule 8- All comments should try to stay relevant to their parent content.

Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.

Rule 10- Majority of bots aren't allowed to participate here.

Credits

Our breathtaking icon was bestowed upon us by @Cevilia!

The greatest banner of all time: by @TheOneWithTheHair!

founded 1 year ago

MODERATORS

Rooki@lemmy.world

Thekingoflorda@lemmy.world

automodbeta@lemmy.world

L3s@lemmy.world

ja2@lemmy.world

_MoveSwiftly@lemmy.world

Where can I find rings with extremely rounded edges and half cylinders stacked above a flat band? (lemmy.world)

submitted 3 months ago* (last edited 3 months ago) by DayOk2@lemmy.world to c/nostupidquestions@lemmy.world

15 comments fedilink hide all child comments

I remember seeing a ring with extremely round edges and the colors pale copper and gray (or gold) combinations in half cylinders.

It had two pale copper and one gray (or gold) half cylinders, with the gray (or gold) half cylinder between the two pale copper cylinders.

The outside of the ring had three half cylinders (two pale copper and one gray (or gold)), while the inside was flat and pale copper in color, and the edges of the ring were extremely round and a cylinder.

The ring had three half cylinders stacked together in one ring. Two pale copper cylinders are placed between a flat pale copper, and the gray (or gold) cylinder is placed above the flat pale copper.

It was also a wide ring. Does anyone know about this ring design?

Edit: Here is an image of a ring that looks similar to my design. Only the edges should be pale copper, and the middle should be gray without diamonds:

top 15 comments

sorted by: hot top controversial new old

[–] ValiantDust@feddit.org 21 points 3 months ago (1 children)

I don't really understand your description and I'm guessing that's the reason for the downvotes. What do you mean by (half) cylinder? Maybe you could try adding a sketch of what you mean?

[–] DayOk2@lemmy.world 0 points 3 months ago

Unfortunately, I do not know how to draw the design because I am bad at drawing.

[–] Mothra@mander.xyz 13 points 3 months ago (1 children)

I tried reading this like three times and I'm not even sure how many bands in total your ring has, whether or not you actually have a round profile for some of the bands or if they're all half round or if the centre one is flat at all.

My rec would be, google images of rings, and try to find something similar to what you have in mind. It's going to be easier to say, "something like this but the outer bands actually look like this other ring right there" or something. Use the images as a starting point

[–] DayOk2@lemmy.world 0 points 3 months ago

Okay, I meant literal half cylinders that are attached to the ring so that the main band has multiple curves from these half cylinders. The edges should also have bigger cylinders in them so that the ring is comfortable to put on and take off, and so that the the small and big cylinders have the same height in the top. This is what I want as the ring design:

Total width: 10 mm
Total height: 3 mm
Width main band: 4 mm
Height main band: 2 mm
Width middle gray cylinder: 3 mm
Height middle gray cylinder: 1 mm when cut off in half or quarters so that the half cylinder can be attached to the main band
Width edges pale copper cylinders: 3 mm, should be attached to the edges
Height edges pale copper cylinders: 3 mm because the extra 1 mm should match the height of the middle gray cylinder

Is this more clear, or should I explain more?

[–] NeoNachtwaechter@lemmy.world 7 points 3 months ago

Chatgpt go home

[–] clay_pidgin@sh.itjust.works 6 points 3 months ago (1 children)

To clarify, are you talking about a finger ring, jewelery?

[–] DayOk2@lemmy.world 1 points 3 months ago

Yes, I am talking about a finger ring.

[–] Curious_Canid@lemmy.ca 3 points 3 months ago (2 children)

I think I understand. When you talk about cylinders on top of the ring you're referring to what are basically stripes inset into the surface of the ring. Do I have that right?

It sounds like you're looking for something similar to this, with more rounded edges: https://i.etsystatic.com/icm/a6e7f9/662727769/icm_fullxfull.662727769_1ui1u9fyb0hwgk0ogkws.jpg?version=0

I had that one custom made for me by a maker on Etsy: https://www.etsy.com/shop/titaniumknights?ref=profile_header

I don't know whether they could make what you need, but it is a place to start.

Best of luck!

[–] cheesymoonshadow@lemmings.world 6 points 3 months ago (2 children)

I was confused reading OP's description, and I'm also confused looking at your link how you got that from OP's description. 😅

[–] Deceptichum@quokk.au 4 points 3 months ago (1 children)

Because it does sound a bit like they’re describing a banded ring.

But the flat plane part is what leads me to thinking it’s not.

[–] DayOk2@lemmy.world 0 points 3 months ago

I edited the post to add an image of a similar ring design. You can look at it.

[–] Curious_Canid@lemmy.ca 1 points 3 months ago

My thought was than an inset, taken as a whole circle, could be referred to as a cylinder. Like you, I couldn't really make sense of the description and was trying to interpret it. Based on the response above I was way off.

[–] DayOk2@lemmy.world 2 points 3 months ago* (last edited 3 months ago) (1 children)

No, I meant literal half cylinders that are attached to the ring so that the main band has multiple curves from these half cylinders. The edges should also have bigger cylinders in them so that the ring is comfortable to put on and take off, and so that the the small and big cylinders have the same height in the top. This is what I want as the ring design:

Total width: 10 mm
Total height: 3 mm
Width main band: 4 mm
Height main band: 2 mm
Width middle gray cylinder: 3 mm
Height middle gray cylinder: 1 mm when cut off in half or quarters so that the half cylinder can be attached to the main band
Width edges pale copper cylinders: 3 mm, should be attached to the edges
Height edges pale copper cylinders: 3 mm because the extra 1 mm should match the height of the middle gray cylinder

Is this more clear, or should I explain more?

[–] Curious_Canid@lemmy.ca 1 points 3 months ago (1 children)

I think I understand now, but I've never seen a ring like that.

[–] DayOk2@lemmy.world 1 points 3 months ago

I edited the post to add an image of a similar ring design. You can look at it.