Homelab

371 readers

3 users here now

Rules

Be Civil.
Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
No memes or potato images.
We love detailed homelab builds, especially network diagrams!
Report any posts that you feel should be brought to our attention.
Please no shitposting or blogspam.
No Referral Linking.
Keep piracy discussion off of this community

founded 11 months ago

MODERATORS

communick@selfhosted.forum

rglullis

Best options for ethernet cable runs through ceiling (alien.top)

submitted 10 months ago by lienad98@alien.top to c/homelab@selfhosted.forum

3 comments fedilink hide all child comments

Hi,

So I have the ceiling open of my kitchen for renovations at the moment and want to run an Ethernet cable from the room on one side of the kitchen to the room on the other side of the kitchen. I also would like the option of replacing the cable easily in the future should such a need occur. My theory is that if I run a length of plastic flexible conduit through the ceiling with the ethernet cable inside of it, then if I need to replace the cable I can just remove one cable and then push the new cable through the conduit and hopefully it will feed all the way through to the other side?

Not decided whether to just create some covering for the terminating ends on the outside of the wall or to break into the wall itself to install a small patch port.

Anyone tried this or got experience with this?

top 3 comments

sorted by: hot top controversial new old

[–] ericneo3@alien.top 1 points 10 months ago

Depending where you live breaking into the wall and running a fixed cable to a terminating patch port requires a cablers license.

Loose cable, conduit with a wall grommet often gets by this requirement as it's not considered fixed.

[–] DaGhostDS@alien.top 1 points 10 months ago

Depending on the space I would go with PVC piping, it's cheap, easy to install and universal.

Make it drop via elbow back in each room wall and if you want your life to be easier, make it go all the way to an access panel.

From there you can just tie up the new cable to the old one when you want to replace it.

[–] dhoard1@alien.top 1 points 10 months ago

Conduit + pull string.

If you need to add a cable, add it the existing pull string along with another pull string. This allows you to have another pull string in place, since you will have “used” the existing pull string.