this post was submitted on 05 Apr 2025
16 points (90.0% liked)

No Stupid Questions

39762 readers
2043 users here now

No such thing. Ask away!

!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)


Rule 1- All posts must be legitimate questions. All post titles must include a question.

All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.



Rule 2- Your question subject cannot be illegal or NSFW material.

Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.



Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.



Rule 4- No self promotion or upvote-farming of any kind.

That's it.



Rule 5- No baiting or sealioning or promoting an agenda.

Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.



Rule 6- Regarding META posts and joke questions.

Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.

On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.

If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.



Rule 7- You can't intentionally annoy, mock, or harass other members.

If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.

Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.



Rule 8- All comments should try to stay relevant to their parent content.



Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.



Rule 10- Majority of bots aren't allowed to participate here. This includes using AI responses and summaries.



Credits

Our breathtaking icon was bestowed upon us by @Cevilia!

The greatest banner of all time: by @TheOneWithTheHair!

founded 2 years ago
MODERATORS
 

I spray-painted a cheap mouse that came with my laptop (it looks messy but in a good way?), and the left/right clicks miraculously worked after a bit of work (the left clicks is actually a bit dampened now, making it quieter!)

However, I think the optical sensor is borked. The mouse can click but it can’t move the cursor.

I’m thinking something like a bluetooth motion tracker that moves your cursor could work if I mounted it on the mouse, but does something like that even exist? I searched online and it doesn’t seem to be a thing. Maybe I have to DIY it a bit by buying a bluetooth motion tracker and using a program that makes it so that is moves the cursor?

all 22 comments
sorted by: hot top controversial new old
[–] tonyn@lemmy.ml 3 points 8 hours ago

With mice, the screws are always hidden by the glide pads on the bottom. It looks like an ASUS WT200 but after a quick look I can't find any for sale.

Ok if you can't get replacement guts, it might be something easy you can fix. Maybe some paint got on the laser or the lens. Flip it over and have a close look at the little hole. Some isopropyl and a q-tip might get it working again.

[–] Rivalarrival@lemmy.today 4 points 16 hours ago

Rubbing alcohol is about the only solvent I know of that is unlikely to fog the sensor. Might take a little while swabbing it with a q-tip.

[–] tonyn@lemmy.ml 19 points 1 day ago (1 children)

Hey, I think your mouse looks pretty cool. I love the speckled egg shell look. It looks kind of like a Robin's Egg. I have some advice for you, if you're interested. If you're going to spray paint something like this, you can disassemble it first with a screwdriver. Take it apart and spray the case only. Same thing for keyboards, PCs, and anything else you can take apart fairly easily. Second, when you're spraying it, suspend it from a string or two, or support it by a single stick from below. Don't touch it until it's dry.

As for your current situation, buy a new identical mouse and transfer the working guts from the new one to your customized one.

[–] scheep@lemmy.world 1 points 16 hours ago

Yeah, I’ve done that with my PS4 controller as well as a logitech pebble (i don’t really like the yellow of the latter though)

The cheap mouse doesn’t have any visible screws and it wasn’t all that important so I just spray painted the whole thing. Don’t think I can take it apart and I’m not sure what this exact model is (all I know is that it’s from ASUS)

[–] themoonisacheese@sh.itjust.works 26 points 1 day ago (2 children)

XY problem: you'd spend more efforts and resources sourcing and installing this thing (that I'm pretty sure doesn't exist) rather than fix the existing sensor that's already in the mouse. Fix the existing sensor that's in the mouse.

[–] Prok@lemmy.world 6 points 20 hours ago (1 children)

Or just buy the same mouse and replace the casing with the spray painted one

[–] scheep@lemmy.world 1 points 16 hours ago

Not sure what model the mouse is, and there’s no screws anywhere. as far as I can tell.

[–] scheep@lemmy.world 1 points 16 hours ago (1 children)

The mouse doesn’t have any visible screws and I don’t think I have the chops to fix the sensor. I have no idea what model the mouse even is

Here is an example of a sensor:

https://media.steelseriescdn.com/blog/posts/why-the-truemove-pro-is-the-best-mouse-sensor/9149970b57824b24a7a4e4e415eb0189.webp

It's the hole in the middle of the mouse.

I've never needed to clean one but others have suggested using a q-tip with isopropyl alcohol to clean it.

You may also wanna clean the glide pads (The rounded shiny parts at the top and bottom) so the mouse glides like new and doesn't "catch" on the table.

[–] Zwuzelmaus@feddit.org 16 points 1 day ago (1 children)

With your Bluetooth you might get to a precision of a centimeter or a few millimeters.

But the computer mouse wants a precision of 1/100 of a millimeter. That's why it has that optical sensor.

I don't think you'd have any fun that way.

[–] Flagstaff@programming.dev 2 points 1 day ago

Wow, I didn't know they were that precise. Cool!

[–] dual_sport_dork@lemmy.world 7 points 1 day ago (1 children)

Wireless optical mice are basically given away free in boxes of Frosted Flakes these days. Is there really any pressing need to "fix" this one in particular via some roundabout method? Like, do you have some sentimental attachment to it, or something? I don't think you're likely to succeed, there. Notwithstanding that the sensors you'd need to buy would be significantly more expensive than a new mouse, but then as you've observed you'd also have to hack up a way to make your operating system treat your new sensors as a mouse input, and also preserve the click inputs from the separate remaining carcass of the mouse.

Really, just replace it. Any nerd should have a whole box of the things. I do; hell, I could just give you one.

The next time you paint a mouse take it apart first. The upper shell is typically quite easy to remove with just a couple of screws and then you can paint it separately from all the electronics to avoid destroying any of the functional parts.

[–] scheep@lemmy.world 1 points 16 hours ago

I don’t see any screws at all, and I got this mouse for free so I spray-painted it for the sake of it. I have a second working Logitech Pebble I also spray-painted where the front cover is magnetic so I just spray-painted that. I think the yellow didn’t turn out too great though.

I did separate the case from the electronics for my PS4 controller, and it looks sick (in both senses of the word) especially with the 3D printed face buttons

[–] Gradually_Adjusting@lemmy.world 7 points 1 day ago (1 children)

You might just get some paint thinner and try to use a swab to get the paint off the optical sensor

[–] dual_sport_dork@lemmy.world 6 points 1 day ago (1 children)

Whatever solvent OP would have to use for this would surely cloud and/or otherwise destroy the plastic lens over the sensor, rendering the exercise moot.

Likely, but it's pretty minimal effort for a chance at saving the effort they were considering to fix it.

[–] trxxruraxvr@lemmy.world 4 points 1 day ago (1 children)

It might be possible to hack something together with an accelerometer, but actual motion tracking that small doesnt exist as far as i know

[–] scheep@lemmy.world 1 points 16 hours ago
[–] scheep@lemmy.world 2 points 1 day ago (1 children)

also I think the scroll wheel is a bit buggy as well, since I spray painted the top half. It seems that the mouse scrolls by using an optical sensor detecting the mouse wheel, and it gets confused when it sees the light blue. That means whenever I want to scroll down, it occasionally scrolls up a bit. A bit annoying, but I’m surprised the thing scrolls at all

[–] lemmyng@lemmy.ca 4 points 1 day ago (2 children)

Most scroll wheels use an optical sensor inside the housing to monitor the motion of the wheel. If you got paint inside the housing then it can confuse the sensor.

Question: did you take off the top of the mouse to paint it, or at least tape off any areas that needed to be protected like the scroll wheel and the bottom sensor?

[–] scheep@lemmy.world 1 points 16 hours ago

…no (in hindsight probably should have taped the sensor)