I'd be wary of loops with your setup to be honest. Wouldn't it be possible to have server A go to B, B to C, and switch both interfaces of B in the same vswitch? Ngl I'm not that knowledgeable about esxi.
this post was submitted on 23 Nov 2023
1 points (100.0% liked)
Homelab
371 readers
3 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 1 year ago
MODERATORS
I've done this before without any loop issues.
I tried something similar one time but not on ESXi. Two ports can’t have the same IP address so I created an /etc/hosts file so each host knew about the other based on hostname and not ip address.
Make the 10.0.0._ addresses loopback addresses, and do point-to-point connections from each box to every other box. No idea how to do this in ESXi, but it’s straightforward in *nix/BSD.
You wouldn't need a crossover cable. 10G ports, as with most/all others these days, are auto-MDIX. They know when they should be in crossover mode and switch automatically.
I prefer using separate subnets for different network adapters. In any case, create vswitch and vmkernel for each network port and configure IPs.