Just to clarify, you want to replace your E210882 motherboard with a new micro ATX board? You can use any micro ATX board - the E210882 is a micro ATX board itself.
this post was submitted on 30 Nov 2023
1 points (100.0% liked)
PC Modding
0 readers
1 users here now
A place for Modders to show off their PC mods that they have made or found online, discuss new mod ideas for their rigs and look for help getting their dream mod project off the ground.
founded 11 months ago
MODERATORS
The E210882 sounds like the motherboard model number. What's the PC model? They might have used the same motherboard in different cases. But from what I'm seeing, the motherboard looks to be a microATX form factor so any microATX motherboard should mount in there. The rear panel might be built into the case or at least not a standard size. So you might have to cut that open to fit a normal rear panel port shield. I would assume you'd swap out the PSU and not try to use the old Dell one so you shouldn't have to worry about any PSU compatibility. The only other thing would be the front panel connector. Dell generally documents their PCs pretty well. So if you look up the model number or Service Tag, there's a good chance they list what pins are for power button, LED and so on. Maybe if you do some searching you "might" find an adapter. But probably you'll have to make your own adapter or splice in some normal dupont connectors.
Find out what case model it is and you can check if a standard board fits. Dell sometimes has weird boards but I quickly Googled your board and it says it is a micro ATX board so the case should fit.
Is it a Dell dimension 4600 or something like that?