An unofficial chapter of the popular Dull Men's Club.
1. Relevant commentary on your own dull life. Posts should be about your own dull, lived experience. This is our most important rule. Direct questions, random thoughts, comment baiting, advice seeking, many uses of "discuss" rarely comply with this rule.
2. Original, Fresh, Meaningful Content.
3. Avoid repetitive topics.
4. This is not a search engine
Use a search engine, a tradesperson, Reddit, friends, a specialist Facebook group, apps, Wikipedia, an AI chat, a reverse image search etc. to answer simple questions or identify objects. Also see rule 1, “comment baiting”.
There are a number of content specific communities with subject matter experts who can help you.
Some other communities to consider before posting:
5. Keep it dull. If it puts us to sleep, it’s on the right track. Examples of likely not dull: jokes, gross stuff (including toes), politics, religion, royalty, illness or injury, killing things for fun, or promotional content. Feel free to post these elsewhere.
6. No hate speech, sexism, or bullying No sexism, hate speech, degrading or excessively foul language, or other harmful language. No othering or dehumanizing of anyone or negativity towards any gender identity.
7. Proofread before posting. Use good grammar and punctuation. Avoid useless phrases. Some examples: - starting a post with "So" - starting a post with pointless phrases, like "I hope this is allowed" or “this is my first post” Only share good quality, cropped images. Do not share screenshots of images; share the original image.
.
I've been kicking this can down the road for years, but I finally got a job that involves cutting so much melamine board there's no way I'm doing it with a circular saw.
I watched multiple safety videos before even opening the package, and now I'm just sitting here staring at it wondering whether I should fire it up and cut off a finger or two. I'm fucking terrified of this thing.
If you haven't already, I suggest investing in a good full-face respirator with replaceable cartridges. Something like this:
The half face ones also work well. But melamine dust is nasty. You really don't want to be breathing that in!
I'm fine and I been hack doing it for 35 years! labored breathing
I got my first real table saw
Bought it at the local home store
Played it 'til my fingers bled
Was the summer of 20 26
me and some guys on lemmy
had a group and we tried real hard
Take my upwards chevron, you silly goober.
I'm fucking terrified of this thing.
Good. A healthy respect for the tool will help keep all your digits in tact. Just exercise proper safety precautions every time and you'll be alright. I've got at least one push stick with a notch in it as a constant reminder of why you never put your fingers near the blade.
Yeah, I think the only powertool that I'm more scared of than a table saw is a chainsaw. I guess the day I stop feeling afraid is when I should stop using it.
I would argue that you should be more wary of the table saw
the chainsaw is farther away from you and you have some time to react. your fingers are right next to a higher speed blade on a table saw and you have no time to react. and you tend to make many more cuts with a table saw than a chainsaw, leading to more opportunities for injuries.
this goes for any tool, but especially table saws: if you're "just making one last cut", stop and take thirty seconds to reset and think about it. do not get complacent.
Routers are pure terror
Modern routers scare me even more. They have things like soft start and such. I've got this little Craftsman cordless palm router, bout it at Lowe's, it's got plenty of power for a trim router, it cuts fine, it's got soft start and it runs quiet when the bit isn't cutting. It's terrifyingly friendly. I'm scared someone out there isn't going to pay it the respect it deserves because of how gentlemanly and courteous it is and end up spraying phalanges across the shop.
Lathe. Lathe will fuck you up.
Nah, fear isn't better than complacency because it can also keep you from doing things safely. Like being afraid to have a push tool too close to the blade means not having enough control over the piece you are cutting.
A healthy respect for the dangers and then taking the necessary precautions is the best course of action. Make sure you have the right tools to push stuff through it without needing to have your fingers close. Not the little plastic thing it probably comes with, but a large thing with a wider pushing part so you have more control. Then adjust the height and use the safety thing that keeps it from kicking back for flat stuff.
I moderate woodworking@lemmy.ca. Please join us there.
Table saws are dangerous tools. Healthy caution and a big amount of respect is warranted. A circular saw of any type can maim you in ways doctors can't fix, and the table saw by its nature is most likely to do so.
Do me a big personal favor and always wear your safety glasses and hearing protection. Believe you me, the fun stops when you're halfway through ripping a board and your eyes reflexively shut because you got sawdust in them. Also: table saws never have anything interesting or useful to say. Don't listen to them.
Okay that last part is me trying to be humorous, actually do listen to the saw, if you hear strange noises it can be indicative of problems. You can hear those through approved earmuffs or plugs.
Something I would do: practice hitting the off button. Get to know where it is, by feel. With your hand and your knee. You're unlikely to put your fingers through the blade during an otherwise safe cut; it can happen, but that's an intuitive problem. Push sticks solve that problem. I've cut myself on the push stick thousands of times with table saws. Doesn't hurt at all. Push sticks are If you can touch the blade with your thumb and the fence with your pinky, use a push stick or push block. Also, get or make a featherboard and learn how to use it. Another useful device for keeping the fingies attached.
The unintuitive problem is kickbacks. Watch this video: https://www.youtube.com/watch?v=u7sRrC2Jpp4 If a piece of wood is trapped between the fence and the blade, and isn't well constrained by the fence, it'll pivot, dig into the back, rising edge of the blade, tension builds up, and then it gets thrown backward. If you're holding onto that board when it kicks back, it can take your hand back through the blade with it. This is why they tell you not to use the fence and miter gauge together: The severed piece is now loose and unconstrained between the fence and the blade near the far edge of the blade, it almost certainly will kick back.
~~"Don't crosscut with the rip fence."~~ I hate that phraseology, I'm gonna cross it out, because I've seen an injury caused by it. I enjoyed it a lot at the time because it was my high school bully that hurt himself, but I still learned this lesson: He was manufacturing rectangles of plywood 3.5 inches wide by 2 feet long. He ripped strips of plywood 3.5 inches wide, and then set the fence to 2 feet to cut them to length. I warned him to set up a stop block. He goes off on me about how it's plywood, there's no real grain direction so "crosscut" and "rip" don't mean anything. I go back to what I was doing, not five minutes later I hear his saw strain, I hear a bang, I turn around to see him doubled over hugging a piece of plywood. It has nothing to do with the grain, it has to do with the shape. That same kickback could happen if you're cutting acrylic, which is an amorphous solid.
Don't use the rip fence unless you have AT LEAST 12 inches of contact between the fence and the board/sheet. If you can't do that, you may need to use a sled or a panel cutter instead of the fence.
Start out with basic operations, do a crosscut with the miter gauge, hold the board and the miter gauge with both hands, feed it gently. Then try some rips.
Oh, one final thing about ripping: The edge of the board or sheet that touches the fence must be rather straight, you don't want to put an apprentice's jigsaw job against the fence because the board might not be well constrained, it may pivot and kick back. There are ways to straighten that edge if needed, learn them.
Holy fuck. That intentional accident genuinely upset my stomach. I don't think I know anything about table saw safety. I guess it's good I don't own one but at least now I know what the shark fin is for. I've had my fair share of incidents with chop saws, handheld circular saws, and chainsaw wheels but chop and table saws stills care me more than cutoff wheels.
I have nothing to add to this. only to say, OP, pay attention to all of it.
Go for it, slow. As a small but determined girl I split quite a number of large-ish boards with a monstrosity of a table saw from the 80s to make beams of the desired width for a tiny house. The important thing is always go slowly. Prepare well. Where is each piece and cutoff going to be at each time of the process. Where are your fingers going to be. Play this through in your mind, only then start cutting. If you cut large pieces build some kind of support they can be pushed onto, falling or hanging heavy pieces are always a bad idea - I also had some wheels screwed onto a support for easier moving of the large stuff. I guess the danger is what makes woodworking so meditative. Lose your attention, lose a finger.
I'm a cabinet installer, and I use a table saw every day. Do not put your hand anywhere near the saw blade when it is running. Use push sticks and never pull a part through from the back of the saw. If the cuts are getting harder to make, put a new sharp blade. Dull saw blades are the most dangerous and cause most kickbacks. You're smart to respect the dangers but with care and attention you can use them without much risk.
Don’t be terrified. Just think before every cut, how the wood will move and where you put your fingers. Get used to not stand behind the saw, you will soon do it automatically. And never do “just a quick cut before I’m done for today”. Those are the most dangerous ones.
That follows to a last task before the end of the day. I saw my friend die at the workplace on a last task. Fucking horrible shit. We were supposed to be gone already.
Damn, I am really sorry to hear that. It is always the “I just wanted to do a quick cut”
He was standing backwards on it ladder only like 5 feet up in a basement, and fell and his legs got caught in the rungs and he hit his head on the concrete, blood was coming out of his ears and he was doing that agonal breathing.
911 accused me of Faking it and wouldn't even send out an ambulance right away, I never made a complaint because it wouldn't have mattered I decidedafter I talked to a mutual friend of ours but I am still pretty salty about it.
Rather do be terrified?
It's the most dangerous tool in my shop, and you have to give it the respect it deserves
If you are led by emotions, you should definitely not use those tools. Be careful and conscious, then the tool is not dangerous at all.
What you want is a 'push stick.' There are a lot of different form-factors, but this one reminds you why:
Let that terror become healthy respect for the danger and start building shit.
;)
Adding a few bits here:
see that plastic cover over the blade? It will get annoying and you’ll want to remove it. Don’t. That’s like removing the seatbelt from your car. There should only be 2 times where it would be necessary. The first and most common is if the cut you are making requires it (you aren’t sawing all the way through the wood/the work piece cannot fit between the table and the guard). Remember to put it back after. The second is if you’re replacing it with a better one. (Typically seeking better dust collection or a “floating” guard). Usually at that point, it might be good to consider if you’re asking too much for the current saw; there’s no lack of companies and products offering solutions to make your tablesaw “better”.
See the red blade insert? Treat that as your no finger zone. It’s a big area yes, but an accident in that area can equal no fingers.
Over time you’ll develop a “healthy respect” for the tool where you will be able to operate it confidently, while also being aware of what it could do if you let your resolve waiver. The same is true with chainsaws and any other tool.
I’m going to give you 3 resources that really helped me get the most out of mine.
The first two are videos that cover some techniques on zeroing your blade. (Note, mine is belt drive and hangs off the back so it’s slightly different, but a majority of what they cover is for ALL table saws).
Stumpy Nubs - Aligning table saw : This is the only reference I’ve seen outside some much older resources that cover adjusting the table at 45*. This REALLY helps move it from very good to great in my experience.
Workshop Companion - Table Saw Tuning : This is FANTASTIC as the history of the old table saw he’s working on is interesting, and he really explains the why’s behind each adjustment. He has a short about tool vibration where you can see and hear how smoothly you can get an average saw to run. The loudest part on mine is the relay engaging the electric motor now.
Yes, you can get by without spending a weekend tuning and swearing at yourself for wasting your time (theres a period where it absolutely sucks until you’re done), but once you’ve gotten it done and done right, all your cuts will benefit. You’ll have a much more enjoyable time in the shop overall.
The last is a book called The Accurate Tablesaw by Ian J Kirby. This book covers not only some of the topics above, but more on safety and technique. I’ve gotten more out of this book than most other woodworking books I’ve found.
I know the above is a lot (more than I was expecting…) but I DO hope this helps some as you continue your journey. Remember to have fun with it! And reach out if you ever need an ear to bounce ideas off of. I’ll try to not be so long winded next time…!
Thanks! Good info
That's one beautiful finger amputator you've got there.
A healthy fear of the table saw is what has kept me safe all these years. Fear it, respect it when you use it.
Wait, why such a sharp and interesting machine on the Dull Men's Club?
I appreciate all the comments here validating OP's trepidation around the table saw. Dull men are cautious, and dull men are way more likely to have all ten fingers.
Cool workshop
Was going to say with a space like that OP was due.
Thanks. Though the interesting side of it is behind me here.
I think too you should just get over with it and cut one or two fingers straight off. Then the ice has been broken and you can just use it without fear of loosing a finger or two.
If you're cutting really dense or thick boards, like you said melamine, then you'll want to find a way to "attach" the saw legs to the floor. That style of table saw WILL move when you are pushing baords through it.
Stay safe brother, have fun rippin!
I actually prefer the circular saw + jig combo for heavier/denser boards.
Ok, I saw your saw and now can go to see other things. Try not to cut off anything important from your body.
Nice saw, don’t cut your fingers off.
Ooooh scary
When I bought my table saw, I grabbed some scrap wood and just did some cuts to practice being safe around the blade. Didn’t bother with measuring, just did the cuts to get the feel for the tool
High four, dude! Congrats!!
(keep the sausages clear of that blade…)
i have a hitachi one. typically keep it folded out of the way since i dont use it that much. it is hella loud when its running though. being made for outside contractor work, the motors on them are as basic as they come. still works well for what it is
I spy with my little eye, safety crocs!