Just buy a piece of clear vinyl or go to a paint shop/car wrapping shop and get a piece of clear bra/paint protection film
I use it on all my builds
If a panel breaks it holds all/99.9999 % of the pieces together
1996Primera
joined 11 months ago
If flat cover it with paint or vinyl
If embossed /indented
Remove the shroud and eith sand flat...or fill with body filler
depends on how the FP reader is connected.
More then likely all the connections/circuitry is all intergrated & a single SOC/cpu controlls both the mouse & FP reader
IF this is the case, your only option is to remove the internals & move into a new body. this will likely require modifications to the housing (cutting, fiberglass/body filler, paint)
I highly doubt the FP reader is on its own & can just be pulled out & put into another mouse & work correctly
Contact paper may work but in my exp they tend to have a yellow tint..also they have no UV protection so if the sun hits it it will really yellow and break down
I have used this brand and others In the past
https://www.xpel.com/products/paint-protection-film