Cirk2

Searched in the source:

Automatically creates RAOP (Airplay) sink devices based on zeroconf

So it's the airplay protocol.

Its not terribly far off from pre rendered or FMV games like Myst are doing it.

Curious what your workflow is that can not be done via a full RDP solution (kfrb/krdc, wayvnc, and whatever GNOME uses) or waypipe?

Minor Hardware changes, essentially bugfix and small feature updates in Hardware. Often with a better manufacturing process improving yield and power consumption.

AMD Mobile chips tend to use a "half-generation" refresh of their main GPU architecture. For example the rdna3 Desktop line is gfx1100, gfx1101, gfx1102 depending on the model. The new mobile GPUs in the strix point CPUs (I. E. the new framework models) have gfx1150/gfx1151 denoting their rdna3.5 refresh.

The UDNA is in reference to amd stopping to have two lines of internal architectures: RDNA for graphics (Radeon cards) and CDNA for compute (like the MI line of chips) and instead have one architecture for both, labeld UDNA.

Starting with denying her person-hood under the unsubstantiated rumor she is the alter ego of marcan, found in this very thread.

Yeah I really want to see the numbers on this.

It seems to be a absolute breaking issue for them, suggesting a actual noticeable delay. So it should at least be one frame (on 60hz display) of additional latency compared to x11. Especially since there is earlier work Using a Click based measurement setup showing no such delay.

The pi is either emitting a mouse move or detecting one on the physical device and measuring the time that passes until the photo diode/resistor (not an led) is detecting the cursor to move away.

It's essentially the same setup you would use to detect input to photon latency if you don't have a high speed camera.

Edit: Ah no there's another setup with a pi pico in there... Yeah it's binding and LED Lighting up to a button press to have two visual indicators (LED and Cursor Reaction) you can measure using a high speed camera. Them only having a 90fps phone camera makes it means the measurements are only in 11ms increments though.

It does, in fact the current version of the wine patch is incompatible with fsync and esync, at least in wine-tkg. Which makes sense since it supersedes both (does the same thing in a more correct and more performant way).

I use wine-tkg (https://github.com/Frogging-Family/wine-tkg-git)

Had no Problems with that in FF14, Remnant 2, Satisfactory, Supermarket Together and Subnautica Below Zero. Tested them all under Sway, not sure how much that influences these results.

From my experience using it: Mostly steam overlay and clipboard copy/paste not working. The rest seems fine.