OrangeCorvus

Built a small machine using an Asrock N100DC-ITX motherboard, it has an Intel N100 built in and I also have 1x NVMe and 2x HDDs. The board has a DC Jack so no external PSU.

First time I booted it, the NVMe had Opensuse on it so I played around a little, no problem. When I boot into BIOS also no problem.

When I boot into Unraid, there is a strange sound coming from the back of the board, sounds like an interference sound. I cannot tell if it's coming from the ethernet port or from the power DC Jack. I think it's from the power.

I recorded it with my phone and bumped the sound +20 dB, this is how it sounds like. You can hear the fans and that sound. https://soundcloud.com/user-300866676-719653331/n100-1

https://soundcloud.com/user-300866676-719653331/n1002

For power I tried using both an Intel NUC 65w power adapter and an Asus laptop 90w power adapter, the one Asrock recommends on their website. The system has been running for 1-2days, with 4 containers and Home Assistant VM, it idles at around 16w. Without Home Assistant, it drops to 11w.

Any idea what that sound is?

Edit 1: If I go into BIOS and turn off Intel Turbo Boost Technology then it is silent but also kills my performance?

Edit 2 So because I did not want to leave Turbo Boost on, I did some more digging and also realized my CPU was always boosting in Unraid. using "watch grep "cpu MHz" /proc/cpuinfo" it was almost always between 2900Mhz and 3300Mhz. I installed Tip and Tweaks plugin and set Normal CPU Scaling Governor to power saver. The sound is gone and now it seems the CPU goes all the way down to 600 MHz and up to 3400MHz depending if it needs it. I don't know if the power saver will affect performance in any way but so far so good and I don't have hear that wheeeeee anymore.

The Asrock N100DC-ITX uses a 19v power brick so no separate PSU to power the drives. It comes with a 4 pin cable that splits into 2 SATA power.

The case I chose, Silverstone SG13, comes with a 3.5" HDD bracket but you need to mount the drive belly up so you can screw it in. The second drive I want to put where the PCIe slot is, found a nice 3d model for that. The thing is, the power cable would be too short and the drives would be too far apart to reach both.

So I removed the HDD bracket and cut 2 L-shaped aluminum stripes and I screwed the drive belly down. This way the cable now reaches both drives. I know, I could have cut the cable and made it longer but I prefer to avoid playing with power cables if I can.

Turned out quite good. Wanted to share it with other people. Now I need to find someone to 3d print the PCIe HDD holder and find some rubber stuff to put under the L-shapes to dampen the sound of the drive. This is the 3d model, https://www.printables.com/model/385403-pci-slot-hdd-bracket but V2 with the nice feet.

PS the drives in the images are broken so I just used them as dummy drives.

That's about it.

cross-posted from: https://lemmy.world/post/3504388

Linux Noob here

The Nuc is sitting under my TV and my wife uses it mostly to watch reality tv shows, cooking shows, etc on different websites. The requirement was for the Nuc to go to sleep after 30minutes of inactivity and to wake it up with the keyboard.

It had Leap 15.3 so I wanted to upgrade it but I managed to botch the upgrade. I decided to go with Debian instead, installed it, configured everything and when I handed it over to my wife I realized the Nuc never woke from sleep. Then I remember I had this problem in the past with it when I tried a whole bunch of distros and none of them managed to wake it up. I also read on Intel forums where people complained about the same issue with different Nucs and I think the general consensus was that it's a problem with the Nucs and it can't be solved.

What happens is, when the Nuc is sleeping, the power LED slowly blinks. When you wake it up, the LED goes completely away, like it's turned off but you can hear the fan is starting to spin. However, you don't have any image and you have to hold the power button a lot longer to turn if off, like it soft-resets.

So I nuked Debian, installed Leap 15.5 and it wakes from sleep without any issues. I am happy that it does and I like Opensuse but I have no idea what it does different compared to other distros in this regard.

cross-posted from: https://lemm.ee/post/4748094

cross-posted from: https://lemm.ee/post/4747949

No, you're not dreaming. Killer Bean is back.

Had an exchange of emails with someone, around 4-5 back and forth emails. He then told me that my last reply never arrived. When I forwarded that email again to him, he told me that actually the original reply arrived but landed in spam... he checked it after I forwarded the initial reply.

It's not critical or even a super important conversation but I think he lied to me. Is there any chance that a reply lands in spam if the last 4 mails in a thread arrived without a problem?

The emails were sent from a custom domain, using Office 365 Business. I have that email address for more than 6 years and I never had a problem with my emails landing in spam or never arriving. It's the first time I am hearing about it but I think he is duping me.

Edit Thanks all for the replies, it's good to know that it can happen.

Linux noob here. Usually in Windows if I have a 1TB SSD, I make a 250GB partition for Windows and all of its things and I use the rest for a second partition where I install my stuff and store my files.

Usually in case Windows decides to go belly up, I still have my files. In more than 20 years it has never happened but I've always done it like that. I mean if Windows goes bad, I can still remove the drive and insert it into a different PC and copy my files away.

Should I shrink Partition 3 and make another one? Or keep it as it is? If I would, I read that I need to boot with a live usb to be able to shrink it. What kind of partition would I make?

The entire game is experienced through your ears. You're blindfolded and going against traffic. Cars rushing past, angry drivers yelling at you. Cops on your tail. And a sadistic madman on the phone. Can you do it?

Play as Donnie, trying to make a quick buck in a scientific study but quickly finding himself in over his head, cuffed to the wheel and driving blindfolded against traffic. Plus he's late for dinner with Grandma.

https://store.steampowered.com/app/1300600/Blind_Drive/

It's incredible how much the prices have fallen and that's how it should be. Sure, I bought the 960 close to launch but still the difference is staggering.

The 960 Evo still chugs along albeit it's a new one because a few months after I bought it, I had to RMA it. I guess that's what happens when you are an early adopter. I lost a few hours of work when the original 960 Evo decided to stop working but it also taught me to be more paranoia with backups.

G’Day there! Get ready to start a new fair Dinkum life and build a home on an Island inspired by the wild Australian outback. Explore tropical eucalyptus forests, survive scorching deserts, relax at cool billabongs and discover scrubland filled with adorable Aussie inspired wildlife. Collect valuable resources by hunting, mining, fishing and foraging to expand and customise your town and attract new townsfolk and businesses. Share your new home with friends and protect each other as you explore beautiful landscapes filled with dangerous predators.

It's a nice mix between Animal Crossing and Stardew Valley. So if you don't have access to a Switch, it might scratch that itch. It's a lot more complex than AC.

https://store.steampowered.com/app/1062520/Dinkum/

Dave the Diver has officially left Early Access!

In this shiny 1.0 release, get ready to explore new areas, dive into the complete story, and encounter a whole bunch of new species and mini-games. We've carried over all the data from Early Access, so no worries there, and you'll have no limits on items and gold anymore.

Official Launch Trailer

Steam page https://store.steampowered.com/app/1868140/DAVE_THE_DIVER/