Bios can be difficult because some of the settings are named differently if you have an amd or intel cpu. Additionally the interface and where the settings are located seems to be dependent on the motherboard manufacturer.
But in general the important things that are required to install windows 11 are uefi boot and the tpm being enabled, and these will almost certainly be set to the correct values by default.
For gaming performance resizable bar/smart access memory improves gpu performance, and xmp/expo improves ram performance, these is a decent chance these will not be enable in the bios by default.
For programming, I also wanted to use the windows subsystem for linux, and I had to go to my bios and enable cpu virtualization for that. Not sure what other workflows might rely on virtualization.
I'll also just mention that at one point I had some instability related to restarting. If I tried to restart it would post but fail to boot into windows, but doing shut-down and then turning the computer on again worked fine. And I think I resolved that by disabling fast-boot in the bios. Note that I wouldn't expect you to get that restart issue, I think it was related to me being on the insider-preview build of windows at the time. But fast-boot-off is something I made a note of as a good troubleshooting step.
Pardon my confusion since I'm new to the fediverse as well, but isn't every Lemmy instance like the super instance you are describing? You can access any community on any instance from any other; there are commentors in this thread from beehaw.org, lemmy.world, lemmy.sdf.org, programming.dev, and many others.