rarely

joined 1 year ago
[–] rarely@sh.itjust.works 0 points 11 months ago

Develop the apps you wish to see in this world.

[–] rarely@sh.itjust.works 0 points 11 months ago

I am not sure about your exact question but will mention that gracefully shutting down and powering up the server may be difficult and time consuming.

[–] rarely@sh.itjust.works 1 points 11 months ago

6 drive bays in a 1u server?! That might be difficult.

[–] rarely@sh.itjust.works 1 points 11 months ago

Are you using docker?

[–] rarely@sh.itjust.works 1 points 11 months ago

There is lots more that should be considered when hardening the server. You may want to consult a sysadmin if you are doing this commercially. A password is very weak authentication.

[–] rarely@sh.itjust.works 1 points 11 months ago

Yes you will need to forward port 80 and 443 to your server from your tplink router.

[–] rarely@sh.itjust.works 1 points 11 months ago

Your router's ipv6 needs to be used for noip

[–] rarely@sh.itjust.works 1 points 11 months ago

Make sure you are exposing your lan network over your vpn and have routes setup accordingly.

[–] rarely@sh.itjust.works 1 points 11 months ago* (last edited 11 months ago)

What do the logs say when you run that command?

Are you intending to route traffic through the VPN to your machine?

Is the VPN always-on?

Basically, if your goal is to route traffic from the VPN to your server, I have to assume your VPN is not intended for privacy (aka preventing ISPs from seeing your data), but rather a purpose-built VPN setup to route traffic from the internet to your server over the VPN. This is a pretty rare setup though and usually done for a specific reason, so I’m assuming you have a VPN for privacy reasons. IF this is true, your first step to getting this setup easily is to disable the VPN or to ignore the VPN for the purposes of setup. I’m not aware of any VPN providers who will give you a static IP with which you can use to forward traffic to your computer. The closest thing I can think of is using cloudflare as a reverse proxy to your home computer, but i don’t think that’s what’s happening here.

Ignoring the VPN, you need to find out what your IPv4 address is. You can find this by going to https://ipv4.icanhazip.com/ . Once you have this, make sure that NameCheap DNS records are pointing to that IP. After that, you’ll need to open your home router admin page and forward port 80 and 443 to your server.

Let me know if you need help and i can help you further. I don't know of a guide or video, i just have my brain.

[–] rarely@sh.itjust.works 2 points 11 months ago

Yes.

Xmpp, irc, email and websites are all pretty small in terms of resource usage. Where you'll have problems are with heavy compute workloads like 3d rendering, AI, 3d gaming (sorry, no crysis), and crypto mining. They all can be done on a rpi but not done well.

[–] rarely@sh.itjust.works 3 points 11 months ago

Yes. AI doesn't actually know anything.

 

Serious question from a beginner in electronics. For reasons I do not fully understand, I have become fixated on the idea of collecting small amounts of electricity from “interesting” sources. I don’t mean “free energy”, instead, I mean things like extracting a few mV from being so close to a AM radio tower using two tuned loop antennas in phase with each other, or getting a few mV from the rain’s kinetic energy with PTFE and using two electrodes which are shorted when a drop of rain hits it. In short, I’ve done small experiments to confirm that I can get a few mV and enough to get me excited but not much more. I know I’m not going to get much power out of this, but I’ve been able to charge a NiMH battery a few mV by being a quarter mile from an AM radio station with my antenna setup. It would be fascinating to me if I could store these small charges in something like a 5V USB power brick eventually.

The smarter idea would be for me to harvest energy with the sun or from the wind or a stream. I’m tinkering with this as well, but larger amounts of electricity scare me for right now. I guess I’ve seen enough experimental sources of harvesting electricity and I’ve gotten the itch to invent, which is a dangerous itch for a newbie like me to have.

The best advice I’ve seen online (ok, it was ChatGPT) is that it’s just not worth it to work with such small amounts of electricity, because the equipment required is too expensive and sophisticated (e.g, devices to read the charge of a capacitor without discharging it) to make anything that’s efficient enough to be worthwhile. Would you agree? Do you know of some other fascinating source of gathering electricity that I should also waste lots of time on?

I just have all these electronic components and magnets and when I move them together the numbers on multimeter get bigger. it’s neat.

view more: next ›