@mooklepticon
I think my Z-offset is too high and I'm compensating it with temperature, but I don't care - nozzle cleans itself well, prints well and even structure is good.
When it works, don't touch it 😀
@mooklepticon Just printing my first #PETG on #Ender
70°C bed
260°C nozzle on the bed
225°C nozzle afterwards
The difference from defaults is huge 😀
Edit: I also attached a pic, but for some reason it did not federated. Let's try a link then schmaker.eu/photos/schmaker/im…
@sic_semper_tyrannis @gigachad What about good old #UrbanTerror ?
I'm not sure if people still plays, but I used to have a lot of good fun back in the days 😀
youtube.com/watch?v=fO-YM9N3-C…
@cesky Zdravím a pozdravuji
Snad nebude vadit, že jsem si sem dovolil odložit testovací post z #Friendica, abych zjistil, jak nám mezi sebou ty instance federují, protože v tuhle chvíli mám otestováno, jak moje posty zpracovává #Mastodon, ale o #Lemmy vůbec nic nevim.
V případě potřeby smažte, komentujte, downvotujte nebo cokoliv jinýho vás napadne.
Díky
Schmaker z konce internetu 😀
@spitfire When I fine-tuned my settings I got a lot of stringing until I reached 225°C for some reason. Maybe it's vendor-specific 😀