skizzles

joined 1 year ago
[–] skizzles@lemmy.world 11 points 2 months ago* (last edited 2 months ago) (3 children)

I just downloaded rufus and a mint iso, here's a couple screen grabs.

Launch rufus, and plug in your usb stick, it should show up under device.

From there click select on the right side. Browse to where you have the ISO you got from the linux mint website and select it.

Once you get back to the other screen hit start.

You shouldn't need to mess with any settings unless you are using secure boot.

Once that's done, you should restart and boot from the USB stick. Depending on the model of your laptop there are different methods to get into the bios to change the settings to allow booting from usb. If it goes into grub mode it will look like a command prompt with a few selections. Just hit enter on the first option and it will boot into the live usb.

Once you are in the live usb mode, it's basically all gui to install, test, etc.

Nowadays the terminal stuff is not really needed for basic use, so you should be able to get spun up pretty easy.

[–] skizzles@lemmy.world 14 points 2 months ago (8 children)

The process is actually simple.

It can be a little daunting at first because it's new, but don't let that discourage you. You can mostly ignore the whole mirrors thing, just pick one that is geographically close to you to hopefully get a better download speed. Outside of that, all the mirrors lead to the same file just in a different physical location.

Installing another software to make a bootable drive. You can use Rufus, which has a portable version so there's no need to install it. I put a link below, there's one in the downloads list that says portable.

https://rufus.ie/en/

There are plenty of step by step tutorials out there, however since Linux is very open, a lot of guides may give different advice and knowing what to/not to do can feel confusing. (For instance, if you have an SSD in your computer, you really shouldn't use a swap partition unless you absolutely have to due to limited RAM.) In most cases though you can get by with the defaults when installing something like mint.

That being said. You could simply make the boot stick and try out the live version of the OS before committing to wiping any of your drives to install the OS. Just know that running the live version from the boot stick will be slow, it may take a little time for things to boot which is normal since you are running the os off of a USB stick.

If you would like some help I could try to give you some guidance. I would just want to know the specs/model of your computer so I can make sure I lead you in the right direction.

[–] skizzles@lemmy.world 17 points 9 months ago (2 children)

Capitalism baby. Can't have you producing your own stuff when the corporations can sell it to you at 10x the price.

[–] skizzles@lemmy.world 9 points 1 year ago

I absolutely agree with you, I dislike the way they are going about it completely.

I don't use zoom, and probably never will, but as article points out, this is not a new concept, it happens every day.

Without federal protections this is and will be our future and our rights will continuously be eroded away. Humans are income streams that are going to be exploited at every opportunity.

[–] skizzles@lemmy.world 14 points 1 year ago (3 children)

Zoom has already backtracked on this. This article even points out that it is opt out, provided after they received huge backlash.

Doesn't make what they did right, but please read the article before you post saying the opposite of what the article says.

[–] skizzles@lemmy.world 16 points 1 year ago (2 children)

Because your 0$ per month after dropping them doesn't hurt their bottom line.

Corporations generally weigh the risks and the benefit often wins out and they make more money because there are enough people that either reluctantly cave into the fee increase, forgot about their subscription or just don't care that it's going up.

It's fairly seldom (but seems to be increasing over the years) to see so much backlash that a company walks back on what they were planning to do.

[–] skizzles@lemmy.world 3 points 1 year ago

バービ sounds more correct to me or バールビ (ba- ru bi) if you want the r sound but if you look it up it is shown as バービー in Japan. Strange that they would elongate the ビー.

I lived in Japan for almost 10 years, so I'm somewhat confident about that. Translations, especially phonetic ones can be a little weird sometimes.