3DPrinting

15590 readers

117 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

j4k3@lemmy.world

andypiper@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

Update on Menippus planter (sh.itjust.works)

submitted 1 day ago by Rutty@sh.itjust.works to c/3dprinting@lemmy.world

8 comments fedilink hide all child comments

you are viewing a single comment's thread
view the rest of the comments

[–] dual_sport_dork@lemmy.world 3 points 1 day ago (1 children)

Dem overhangs, tho. Did you print this upside down, with the open end on the print bed? It looks quite good.

I think PETG is probably a good choice for this application. PLA, especially if it's thin walled as I suspect it is here, will disintegrate pretty quickly with continued exposure to temperature variations, moisture, and sunlight.

ABS is infamously pretty vulnerable to UV, also. You could protect it (or any of the others, really) with a coat of paint.

[–] Rutty@sh.itjust.works 1 points 23 hours ago

Printed right side up. Everything was achieved via support setting optimization, and heated support removal where necessary (nose and lip in particular).

PLA holds up alright, but it’s gets brittle. There are just better choices.

Interesting point about the ABS, it appears to be holding up very good, but I’ll monitor it overtime.