That is true.
Also, consider an impact driver. You'll thank me
this post was submitted on 27 Feb 2026
32 points (83.3% liked)
Showerthoughts
40762 readers
989 users here now
A "Showerthought" is a simple term used to describe the thoughts that pop into your head while you're doing everyday things like taking a shower, driving, or just daydreaming. The most popular seem to be lighthearted clever little truths, hidden in daily life.
Here are some examples to inspire your own showerthoughts:
- Both “200” and “160” are 2 minutes in microwave math
- When you’re a kid, you don’t realize you’re also watching your mom and dad grow up.
- More dreams have been destroyed by alarm clocks than anything else
Rules
- All posts must be showerthoughts
- The entire showerthought must be in the title
- No politics
- If your topic is in a grey area, please phrase it to emphasize the fascinating aspects, not the dramatic aspects. You can do this by avoiding overly politicized terms such as "capitalism" and "communism". If you must make comparisons, you can say something is different without saying something is better/worse.
- A good place for politics is c/politicaldiscussion
- Posts must be original/unique
- Adhere to Lemmy's Code of Conduct and the TOS
If you made it this far, showerthoughts is accepting new mods. This community is generally tame so its not a lot of work, but having a few more mods would help reports get addressed a little sooner.
Whats it like to be a mod? Reports just show up as messages in your Lemmy inbox, and if a different mod has already addressed the report, the message goes away and you never worry about it.
founded 2 years ago
MODERATORS
ex HVAC tech, impact was my go-to drill due to sheet metal screws.
So does a hammer if you hit a screw with it.
Most drills that I've seen do have a screwdriver setting on them. It differs from normal drilling in torque and probably speed.
Disengages the hammer too
I reckon as soon as you remove the bit, it is no longer a "drill", its just a generic "[spinny thing] driver".
"Drill" is a short hand for the combination of driver and drill bit.
These modern mongrel drill drivers have betrayed their pure drill ancestors by screwing around.
The device is the drill.
The driver or bit is the thing you insert into the end of the drill.
If the attachment is what makes it a screwdriver, then the attachment is also what makes it a drill.
An electric kitchen mixer is not a drill. At least, it wasn't designed to be one. But I could weld a drill bit on there and turn it into something which can maybe drill - if terribly.
Similarly, the 'device' part of what we call an electric drill can't drill anything, not until you put the drill bit in. It's not a drill in its base form - just a handheld spinny thing waiting for a purpose.
But I could add a whisk and turn it into a kitchen mixer....
We generally call the body part of a drill 'a drill' because that's what it was designed to be. It's got speed settings and torque control and hammer function and all the things that were engineered to make it good at drilling. But it's not a drill without the bit - both practically and philosophically - and what community is more philosophical than showerthoughts.
If we're speaking philosophically, do we really know that an electric kitchen mixer, when fitted with a bit, would make a terrible drill? It's probably not something that's been tested or studied much, if at all.
For all we know, if would make an excellent one.
Maybe we should apply for grants, talk to labs. Set up some experiments.
The drill is the shit you insert
Sir, if you are inserting actual shit, you're not going to have much success either turning screws or making holes in things.
Both are just an engine with spindle. They are the same if you ignore nuances like torque, speed, etc...
That's right. Every tool is a lathe one way or another.
drills do work unironically well as lathes