Bambu used to only remotely disable your printer if you didn't connect it to their servers. Then they sent a legal team to harass you if you tried to circumvent this restriction.
Now they remotely burn your house down.
this post was submitted on 23 May 2026
671 points (99.0% liked)
3DPrinting
22718 readers
218 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 3 years ago
MODERATORS
They're working on "something".
Working on pointing out that Bambu Labs has known about the issue and failed to issue a recall. They just need the failure analysis lab report to prove that it is a design/manufacturing/QA defect so they can pin the responsibility on Bambu Labs.
In the legal world, knowing about a problem and failing to fix it opens you up for punitive damages if that problem causes harm.
Typically, if an damaging event happens and the manufacturer is found responsible, then they are only liable for the damage caused (i.e. the fire damage and printer replacement).
If they are found to have known about this in advance and failed to fix the problem prior to it causing harm to the plantiff then the plaintiff can also seek punitive damage which are not limited to the damage caused and are instead a means of punishing the company for not taking responsibility and fixing the issue that they were aware of.
This is why you see lawsuits resulting from tens of thousands of dollars of damages being awarded millions of dollars.
As it turns out, it is a bad idea piss off a community of highly motivated individuals with the knowledge and technical skills to highlight your shitty business practices.
Exactly right, which is why the hot McDonald's coffee lawsuit had such a high penalty. They were knowingly giving near-boiling coffee to their customers to avoid giving free refills, and knew about the dangers and burns caused to their customers for years.
Punitive damages are the capitalist system answer to disregard for damages caused by products and business practices.
Then they engaged in a smear campaign against a woman who suffered 2nd and 3rd degree burns on her genitals. People laughed about it for years. But hey, McRib and Szechuan sauce.
Sure but McDonalds won the public option on that. People still bring it up as a stupid lawsuit.
Due to McDonald's twisting the truth. That woman was seriously harmed but McDonalds lawyers spun it into a joke.
I've really watched Bambu go from darling of the 3d printer community, to "yeah there's some issues but the results are just so good I still recommend them" to "Bambu is literally Satan"
Public sentiment about your brand is a currency and they cashed all of theirs in within the span of like a week.
The controversy started like a year ago... Firmware version 1.8
All in the span of like a week now too which is wild
Nah, opinions of them have been sliding for a while. The software licensing stuff is just a topic that attracts certain vultures, making coverage suddenly explode.
What's amazing is it was fast. Like I was playing with my mk3s when they where first a thing, and now I'm thinking of retiring it for a core xy and bamboo has done the entire story arc.
Build a Voron!
- rabbid Voron owner
Dig through my comment history and you'll see pros and cons of choosing to do so. If you like building and modding it's hard to beat. The build is pretty long, but you'll learn a lot.
I'll be honest. If it was me 7-10 years ago I would do it. Current me however gives away 3d printers to people (first one is free...) that don't fit my current needs. So for the next FDM printer it's probably going to be a Prusa Core One.
used to love building printers. hated printing parts for printers. It's all ABS/ASA and those are hard to print, what with the warping and bed/layer adhesion and toxic fumes. I print on a Railcore, which is an absolute beast of a printer and probably more sturdy than your average Voron, but it really wasn't designed to be fully sealed so anything other than PLA has been a struggle for me.
I totally get printing and/or sourcing parts as another barrier on entry. I was able to print my own parts with my wanhao i3 plus under a very large cardboard box. Vorons are popular enough that you can buy pre-printed and/or CNC parts now, but their print it forward program has been around for years. But all of those come with some form of cost.
the results are just so good I still recommend them
It helps that other brands have become much more competitive in terms of feature set, pricing, and customer support! Perhaps they were ahead of the game in the past, but brands like Prusa, Qidi, Elegoo, Snapmaker, etc. are leapfrogging Bambu nowadays!
They where never the Darling the hard cores I was here first crowd always hated them.
Hardcore users don't get to pick the darling. Revenue does.
Revenue isn't what defines a darling; it's about being universally loved and a popular choice. The one who is always topping youtube review lists as a best-buy. And especially when they started small and are still growing.
Yes - that might in turn lead to becoming the dominant player with the most revenue, but the revenue is the result, not the cause.
I'm trying SO hard not to be smug, but I sense a sort of vindication from staying FAR away from these (admittedly initially impressive) machines when I heard how locked down, cloud-connected, and appliance-like they were.
"Somehow 'I told you so'. . . doesn't quite cut it."
–Will Smith as Detective Spooner, "i-Robot"
Well feel smug i have had two and been the best printers I have ever owned. Well I purchase another probably not the way things are going but no regrets and keeping it till it stops working.
I really wanted a p1s after my first ender 3 woes, thank goodness I was too broke att!
Well that's awfully nice of them.
Steve is the GOAT. They've done this in the past for GPUs that melted/caught fire at the power connection port. They also replaced someone's PC that was lost in an unrelated house fire.
Gamers Nexus is great content.
They constantly seem to do the right thing. Like honest people wanting to report honest news, findings and research in depth to people transparently.
Like Louis Rossmann, tho I prefer Steve & GN
load more comments
(1 replies)
WHAT
Which models are affected???
A1 model has multiple reports, I'm not sure about others yet
And only recent ones or older ones too? I luckily don’t own an A1, but if other models are affected I might never use them again
Pre-2025 ones. I have to check mine :-(
Well fuck need to check mine then. Bought it used so I don't know if it's older than that
Seen elswhere : it seems that it's due to high current with 110V. I am on 220V so it's less prone to default.
It's the NTC component on the alimentation board.
EDIT. No. The 220V is also prone to the issue :-(
Shit.
I bought mine straight from Bambu. Could smell burning electronics after 50p hours of use or so. Then it wouldn't turn on. No interaction whatsoever. Contacted support, had to dismantle and send a few pics. A quick video of me plugging it in and the results. Then they shipped me a new power board. Installed it and carried on. It was very obvious what part had failed. I was frustrated at first but all told, it was a pretty good experience.
Finally got around to checking mine this morning, luckily I don't have the component
Are there instructions on what to check? I have an X1C from May 2023. Would that be affected?
I think it only affects the A1. On the a1, board 2 is the safe one. The circular black thermistor on the left side is the component that overheats
load more comments
(4 replies)
Fuck Bambu
bambu really stuck their dick deep in that beehive, didn't they...
couldn't have happened to more deserving company.
Dang that was the first 3d printer company that had me intrigued... Hopefully this is making hay is a short lived field, but it's not great publicity
Sorry if I’m the bearer of bad news, but this is somehow not the thing Bambu is doing that is their biggest issue with consumer trust right now.
There are probably plenty of posts here on Lemmy about the issues with the AGPL, potential violations, and sending sketchy legal threats to hobbyists trying to let people use their printers without going through Bambu servers; it is likely worth looking around for the latest on that debacle
They've also threatened hobbyists trying to let use people use their printers explicitly with using Bambu servers!
load more comments
(1 replies)
Go with Prusa.
They offer printers with the same level of technology and the company is very pro-consumer. The slicer that Bambu Labs ships was forked from the open source slicer developed by Prusa.
This. For some reason there are people out there are still hell-bend on telling everyone Prusa would be "behind the curve" or "overpriced". Ignore that nonsense. They're pricey, but they're also quality and even more relevant right now the printer will be truly yours. Their services like Printables just work, meanwhile the first thing Makerworld slaps into your face is either begging to make an account or forcing you to just to download something.
I mean... I love prusa and their hardware is really really good, but calling them "pricey" is a just a bit of an understatement. You can buy 4 snapmaker U1s for the price of a Prusa XL (or cover my rent for 5 months...), and there's no appreciable difference in print quality between the machines. The XL uses higher quality components, but not so much that the difference is gonna be relevant to a consumer level (or realistically even to a hobby level) user.
load more comments
(2 replies)
load more comments
(2 replies)
load more comments
(1 replies)
That helpful link shows just the A1? I have an a1 mini from 2024 I hope I don't get this issue? Now that I know more about 3d printing I'll be er give my money to bambu again. Literally cancer to open source, glad I've never connected my printer to WAN and always have it in LAN mode.
load more comments
(1 replies)
view more: next ›