I just want a new version of the Prusa Mini already.
this post was submitted on 14 Aug 2026
121 points (100.0% liked)
3DPrinting
23542 readers
77 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 3 years ago
MODERATORS
I got tired of waiting for that and was going to buy the Qidi X-Smart-3, but I waited just a couple of months too long and had to settle for a an A1 Mini combo instead, and no it's not connected to the cloud.
I do have to admit, I do like the AMS lite because it allows me to use every last gram of filament off of a spool and then auto switch to a new spool. But I did have issues with their software/firmware in the beginning. It damaged both of the plates I had within the first month. I had to wait for the next firmware update for the fix.
In case you aren't aware, A1 Mini can also catch on fire, see:
Bambu Lab A1 NTC thermistor fire and meltdown hazard
Please keep that in mind and take necessary precautions if needed.
I'm in the US and on 120V power. Which only provides a quarter of the power vs the 240V mains used in Europe, to the heat bed making it far less likely to happen. Plus, I use a surge protector for it. Nor do I run overnight prints because I don't trust ANY 3D printer. And that includes my Prusa. I'm no Bambu fanboi, but one reported case of a mini catching fire is statistically irrelevant.
That said, there is an inherently greater risk of fire with certain types of hobbies. And 3D printing is one of them.
I'm not a fanboi of any brand too, but just a FYI, it has been multiple reports, instead of an isolated case.
Glad to hear you are well aware of overall risks, as that might not be the case for newcomers that might read these posts, so I prefer to at least let them know of it. And as always, letś have fun at it
How many is multiple? I want to know because this is important information to me. But I also want to be unbiased in my evaluation of risk.Your link is the first I have heard of the mini having issues. And they only list 1 mini, all the rest are A1 machines. I cannot find in my searching for any other mini that has melted or caught fire. It certainly does not show up in any other 3D printing forum I have been in except here this one time for one machine.
Oops, my bad. Apologies, as I forgot we were talking about A1 Minis specifically when I mentioned "multiple reports" in my last comment.
Hey, it's cool. I got that tee shirt too.
The bit at the end about Prusa Connect Local looks promising. I like self hosting, and it always left a bad taste in my mouth when a lot of features were locked behind their cloud system.
I was initially excited to hear the XL was finally getting some attention, but the price of this upgrade has me quite disappointed. It would cost me at minimum $500 to upgrade my 5 tool head XL, and that's not including the new high flow nozzles.
I was an early XL adopter and pre-ordered based on my great experience with their MK3S printers. I love my XL when it works as intended, but it's been a long and rocky road to get it to a point of being pretty reliable. I've sunk countless hours of my time and loads of filament tinkering with and without Prusa support to troubleshoot issue after issue and even then still having to wait months or years for software updates to solve problems that it never should have shipped with.
So now to find out that there's finally a real solution to make it the printer that was promised years ago, but it costs as much as many printers is yet another letdown in my XL journey.
Ordered the Core One+ gen2 kit
Wooo! Time to upgrade your expensive beta test!
Isn't the INDX upgrade super delayed because Bondtech couldn't figure out the nozzle heat treating?
I saw several videos about Prusa INDX recently and decided it would be my first printer. I hope the Prusa version does not get delayed for too long. It has already taken me years to decide where I wanted to start.
As mentioned in another comment, I don't think it's delayed, unless you want an assembled one. They've sold the first batch of upgrade kits, shipping September, with more upgrade kits coming soon and full Core One+ with INDX coming later (as kits and assembled).
If you're itching and want to learn more before getting into toolchangers, the Core One (and One+) announced today are a great place to start, and can be upgraded in the future as newer models release.
A reliable printer with three good tools would be the solution. The closest to that is still Snapmaker. I have no idea what Bambu was thinking with 1 1/2 heads, but until this industry figures out their shit, I'm not buying a multi tool head printer. I'm waiting on Creality because they promise to take TPU seriously, but they always underdeliver. Looks like number of toolheads is the new multi razor.
Depends on what you want out of your printer. 5 is the minimum for me for multicolor prints. I usually max out my MMU when I'm doing that, and the new color mixing can take advantage of even more.
3 is probably all you need for structural stuff. One PLA, one PETG, one TPU and you can make tons of very unique, useful items. But 5 colors + support + TPU? That's an amazing amount of flexibility and design options.
What's MMU mean in this context again?
Multi Material Unit
https://www.prusa3d.com/product/original-prusa-mmu3-for-mk4s-mk3-9s-full-kit-2/
It's the Prusa version of the multi color filament feeder.
That's really cool.
I wonder if the design is open, its out of my price range but it looks like it'd be pretty fun to build.
https://github.com/ArmoredTurtle/BoxTurtle
There are open designs. I know this one used to be popular.
Not delayed AFAIK - just not with "hardened" steel nozzles. They currently have nozzles that are steel and hardened, but not hardened to the level of printing carbon fiber, glass fiber, glow in the dark and other filled materials. ~20HRC vs ~50HRC, where standard brass are ~5HRC.
Personally I'm not doing multicolour and multimaterial with filled materials so not a big deal to me, but it'd be nice to have the option I suppose.
I received my INDX dev kit a few days ago, and I'm currently working through the installation on a Voron 2.4. It's been a lot of fun so far, hopefully using it goes as well. Can't speak for the Prusa side of course but knowing them they have better documentation and support.
Apparently there are also QC issues with the heating coil.