this post was submitted on 02 Oct 2024
1066 points (99.4% liked)

Greentext

4390 readers
1356 users here now

This is a place to share greentexts and witness the confounding life of Anon. If you're new to the Greentext community, think of it as a sort of zoo with Anon as the main attraction.

Be warned:

If you find yourself getting angry (or god forbid, agreeing) with something Anon has said, you might be doing it wrong.

founded 1 year ago
MODERATORS
 
top 50 comments
sorted by: hot top controversial new old
[–] metaStatic@kbin.earth 128 points 1 month ago (9 children)

Most of this is true, I've never used cast iron in my life

[–] pruwybn@discuss.tchncs.de 75 points 1 month ago (1 children)

Some of this is cast iron, I've been true my whole life.

[–] SorteKanin@feddit.dk 34 points 1 month ago (1 children)

True is some of this, I've been cast iron my whole life.

[–] XTL@sopuli.xyz 23 points 1 month ago (1 children)

True iron is some of this, I've been cast my whole life.

[–] mousetail@programming.dev 23 points 1 month ago (2 children)

My whole life is cast iron. I've been true for some of this.

load more comments (2 replies)
load more comments (8 replies)
[–] immutable@lemm.ee 102 points 1 month ago (11 children)

I bought a $20 cast iron pan at target, I season it like once a year. I just wash it and make sure to dry it, I’m sure this is against the rules. Seems to work fine for me though. I wouldn’t say it’s nonstick but it’s mostly fine.

A $20 Teflon pan would be flaking and unusable, so for $20 it’s a good deal.

[–] Annoyed_Crabby@monyet.cc 39 points 1 month ago* (last edited 1 month ago) (3 children)

I bought those cheap marble coated pan, now entering 2 years of frequent use, other than tiny bit of degraded non-stick capability, it works just fine, didn't even chip. I bought an expensive teflon once, it only last around half year before it start chipping. Teflon is just bottom tier coating now.

I also own a cheap cast iron skillet, cook with it frequently, wash with soap and only heat dry it, didn't even bother with seasoning after washing, it now has a nice, smooth patina on it that mostly non-stick. I genuinely don't get why people always baby a cast iron, it's a hilux, not a cybertruck.

load more comments (3 replies)
[–] thefartographer@lemm.ee 19 points 1 month ago (7 children)

I have a cast iron griddle that I use once a year at my mom's house. I leave it in the outdoor grill when I'm done using it and don't even clean it. The next time I go to use the grill, I take out the cast iron griddle and just leave it out in the elements and it rusts like crazy.

Then, the day I'm ready to use it again, I scour the shit out of it, heat it up to 500-600°, throw some oil on it like a greased up whore, and get the lowest quality seasoning on it.

Then I use it to grill some ears of corn so they don't turn black from the soot of all the wood I burn to heat the outdoor grill. Once the corn is done cooking, I close off the grill and tell the cast iron griddle to go fuck itself.

load more comments (7 replies)
load more comments (9 replies)
[–] Virkkunen@fedia.io 74 points 1 month ago (2 children)

Don't these pans last like generations, being passed down? I doubt your grandma and her grandma were bothering to apply 8 coats of flaxseed oil and heating it up to 1000 degrees and the pans would still perform as expected for ages

[–] lol_idk@lemmy.ml 38 points 1 month ago* (last edited 1 week ago) (1 children)
[–] ch00f@lemmy.world 47 points 1 month ago (2 children)

If I know grandmas, I was probably purchased at Kmart in like 1996.

load more comments (2 replies)
[–] ngwoo@lemmy.world 35 points 1 month ago (2 children)

Has anyone outside of a commercial kitchen ever actually destroyed a stainless steel pan though

[–] Lumisal@lemmy.world 17 points 1 month ago (14 children)

Yes.

Apparently you can't hear up tortillas in them without it forever getting scorch marks. I suppose only thing I haven't tried is using a machine sander on it to try to remove it.

load more comments (14 replies)
load more comments (1 replies)
[–] riodoro1@lemmy.world 57 points 1 month ago (9 children)

Reject tradition. Embrace forever chemicals.

load more comments (9 replies)
[–] NuWuX@sh.itjust.works 44 points 1 month ago (1 children)
[–] Psythik@lemmy.world 19 points 1 month ago (3 children)

There is nothing wrong with putting cast iron in the dishwasher. I do it all the time.

[–] Enkrod@feddit.org 43 points 1 month ago

Skillet issue

[–] NigelFrobisher@aussie.zone 39 points 1 month ago (6 children)

Stainless steel I swear by though. Easy to clean and nothing sticks if you heat the oil properly.

[–] EatATaco@lemm.ee 17 points 1 month ago (6 children)

While oil is necessary, It's more about how you preheat it and your technique, rather than how you oil it; no amount of oil is going to save you from over crowding a cold pan.

load more comments (6 replies)
load more comments (5 replies)
[–] thawed_caveman@lemmy.world 37 points 1 month ago (8 children)

it's so much better than stainless

debatable but i think so

it takes a little maintenance

everything needs maintenance in the sense that you have to clean it. jokes aside, the only maintenance it needs is to burn oil in it if the seasoning got a little damaged for any reason

can't cook anything tomato based

you can, it's not great but won't ruin it

eight coats of oil you have to burn onto it before you can use it

that's not true, all cast iron pans come pre-seasoned from the factory

you can cook fried eggs and steak

that is true

even after seasoning it everything will still stick to the pan

not really, it's pretty non-stick

to clean it you gotta heat it up then dry salt scrub then re-season

not really, you only need to do that if the seasoning got damaged

if water ever touches it the entire thing will disintegrate

that's not true, you'd have to leave it in water for days to get it to rust

things that aren't mentioned: you gotta use it regularly otherwise it gets sticky; you can use metal tools like knives and spatulas directly in the pan that would demolish any teflon; the seasoning is more resilient than people think, you can even wash it with dish soap; the seasoning actually gets stronger when you fry fatty things in it (grilled cheese, steaks, eggs, sausages); it's very simple, durable, rustic, old technology, and incredibly cheaper than skillets of a similar quality (excluding cheap teflon pans); you can unrust it in your garage and even weld it back together if it breaks, which is sick as hell.

load more comments (8 replies)
[–] dejected_warp_core@lemmy.world 34 points 1 month ago (2 children)

My biggest gripe with Teflon, after the whole PFAS problem, is that you have to baby it. I never was able to find a plastic spatula that worked well for any application. At worst, some are so darn floppy it's like trying to flip an fried egg with another fried egg. Not to mention, the leading edge would eventually melt and deform sending plastic shreds everywhere over time.

The things you can do cooking-wise with metal tooling just get you more control and better results. Any pan/pot that lets you do that is going to help your overall cooking experience. Plus, even if you don't go carbon steel or iron - say, stainless or even glass - de-glazing the pan with some water and heat from the range can make short work of cleaning.

One last point to this rant: your favorite cooking shows are lying to you softly. Your cookware are tools - they're gonna get fucked up. Used things eventually get scratched, stained, singed, dented, and that's okay; I promise you they're not unsanitary because they're in this state. Those stainless pans with mirror-perfect surfaces, or carbon steel skillets with that pristine golden hue, they're new; you usually see new product on camera thanks to sponsors and the general optics of the thing. Teflon pans hold out this false promise of pristine cook surfaces that just aren't realistic. And in practice, even those awful things do not go the distance. So yeah, reject modernity and all that. You'll be okay.

load more comments (2 replies)
[–] thedeadwalking4242@lemmy.world 31 points 1 month ago (1 children)

In all seriousness my cast iron never looses its seasoning and is the best non stick I have in my house. I refuse to go back to PFSA

[–] ALoafOfBread@lemmy.ml 25 points 1 month ago* (last edited 1 month ago) (1 children)

People have weird ideas about seasoning. It is literally oil polymerized and bonded to the metal with high heat; but people act like it just rubs off. You can scrape seasoning off, but it's hard. I need steel wool to do it.

I think these people complaining aren't really seasoning their pans - just using dirty pans (i.e. the oil hasn't fully polymerized).

[–] exasperation@lemm.ee 20 points 1 month ago (8 children)

Different types of oils form different polymerized surfaces, too. Related to the greentext, some people came up with the idea of flaxseed as the best oil for seasoning cast iron based on some theorycrafting about chemistry at a high school level, and it turned out that flaxseed oil seasoning chips and flakes really, really easily.

So there are a bunch of people out there doing it wrong and complaining that it's too fussy.

load more comments (8 replies)
[–] TimewornTraveler@lemm.ee 31 points 1 month ago* (last edited 1 month ago) (6 children)

lol look there's one main benefit of cast iron: it holds heat really well. it is not easier to use or maintain than steel, but if you want something that holds a lot of heat, look no further

[–] LustyArgonianMana@lemmy.world 30 points 1 month ago* (last edited 1 month ago) (1 children)

No, the main benefit is that it is made out of something edible that won't give you cancer

[–] ngwoo@lemmy.world 25 points 1 month ago (4 children)

Stainless steel is unreactive and is leeching less into your food than cast iron, if that's your main concern. We already know that burned things are a carcinogen so why wouldn't that include burned polymerized vegetable oil?

load more comments (4 replies)
load more comments (5 replies)
[–] scytale@lemm.ee 28 points 1 month ago (1 children)

That and they’re very heavy. I think I’ll go with carbon steel instead. Yeah you still have to season it, but at least its easier to handle.

load more comments (1 replies)
[–] ColonelThirtyTwo@pawb.social 27 points 1 month ago* (last edited 1 month ago) (5 children)

This has been my experience with cast iron. There's so, so, so much conflicting information on them. Even in this thread.

I wish the Mythbusters would come back just to test via experimentation all these conflicting claims.

load more comments (5 replies)
[–] RBWells@lemmy.world 26 points 1 month ago (5 children)

Cast iron is cheap, indestructible, gets better with time, does want some care but nothing outrageous. I do have a good stainless skillet as well, call it the "stick pan", if you want something to stick and then deglaze, it's good.

But the cast iron is my joy, my kids joke that I love it more than I love them (it is older than they are) and already argue about who will get it when I die. Have never bought a nonstick pan, they seem unhealthy, and old cast iron is satiny and nonstick. It suits the way I cook, or perhaps the way I cook has been shaped by the pans. I don't worry about tomatoes or wine sauce but wouldn't slow cook spaghetti sauce in one, would use stainless or the Le Cruset one for that.

Mostly I think it's like flannel, not great at the start but improves with use, ends up better than everything else and then stays better for a long time. In the case of cast iron that could be several generations.

load more comments (5 replies)
[–] AgentGrimstone@lemmy.world 25 points 1 month ago (3 children)

I just like how I can use my metal scrapers and spactulas without having to worry about damaging it.

load more comments (3 replies)
[–] TheFerrango@lemmings.world 24 points 1 month ago (1 children)

Nothing beats the feeling of pouring cold water on the still hot cast iron pan.

[–] masterofn001@lemmy.ca 35 points 1 month ago (2 children)

I didn't know metal exploded until I accidentally the pan.

load more comments (2 replies)
[–] Someonelol@lemmy.dbzer0.com 23 points 1 month ago (7 children)

I like to avoid the hassle of taking special care of a cast iron and just use a stainless steel pan from IKEA. Spray on cooking oil works really well to keep food from sticking if your don't crank up the heat and anything that does get stuck can be easily scrubbed off with a copper scouring pad. Best part is that there's no need to worry about rust. Ultimately just use what you like most.

load more comments (7 replies)
[–] elvis_depresley@sh.itjust.works 22 points 1 month ago

why use a forever pan when you can have forever chemicals?

[–] arc@lemm.ee 22 points 1 month ago (11 children)

I have a cast iron pan. Pros - it'll last forever if you look after it, it doesn't contain PFAS and generally it is non-stick enough to not be a nuisance. Cons - heavy AF, needs to be cleaned and dried after use & not in a dishwasher. I haven't tried to cook anything acidic in it yet but it does okay for steaks, eggs, mushrooms, sauces that I have used it for.

I still use soap and a plastic scrubber on mine and just dry it on the hob for a bit. I haven't had to reseason it yet but I imagine it will be a pain in the ass when I do. I have seen part of the seasoning flake off but it normally self heals with more cooking.

So it's okay overall but I think lack of PFAS and the fact that this thing will last a lifetime are the clinchers. Even if you have non-stick buy one of these and use it by default. I expect a stainless steel pan would be good too for same reasons.

load more comments (11 replies)
[–] lath@lemmy.world 22 points 1 month ago (1 children)

Yeah, but one hit with this baby and you'll send any ghost straight into the afterlife.

load more comments (1 replies)
[–] Mpatch@lemmy.world 21 points 1 month ago

Nah my cast only washes with hot water and small Scraper. If you need soap. We'll you don't like actualy don't. Seasoning? Just cook bacon, dump the grease leave a bit in put it back on the stove for a hot minute or while you put your blt together. Done it's hunk of metal not much you can do to fuck it up. And if food is sticking to it probably cause you didn't get the pan hot enough before you put the food in.

[–] weeeeum@lemmy.world 21 points 1 month ago (3 children)

I use a wok and I wish I could use it for everything. I love that little damn thing to bits. I have only seasoned it twice (removed the previous one due to rust) and it can fry an egg fine.

It handles soap, tomatoes and other acidic foods fine as well. Didn't use any fancy oil, just avocado oil.

My mom's 300$ tephlon pans don't even last more than 8 months without getting nicks. My Lil fella is 15 years old.

They want to brainwash into using expensive, disposable, products.

load more comments (3 replies)
[–] mlg@lemmy.world 19 points 1 month ago* (last edited 1 month ago) (1 children)

I'm honestly surprised it took this long before Teflon and PFAS in general became a more public issue.

Especially after project farm showed how easy it is to scratch the coating material. I think only like 2 pans actually held up somewhat in hardness.

Not objective by any measure, but I don't think ingesting dissolved iron is as bad as dissolved Teflon.

load more comments (1 replies)
[–] jabathekek@sopuli.xyz 19 points 1 month ago (5 children)

Counterpoint:

It doubles as a weapon that can induce blunt-force trauma.

load more comments (5 replies)
[–] Furbag@lemmy.world 19 points 1 month ago

I bought like a $30 one at the grocery store a few years ago and it's still going strong. If I forget to use it for a long time it'll get a patina of rust, but it scrapes right off. I only seasoned it once when I got it with beef tallow.

Honestly if I threw it away today and bought a new one it still would have been cheaper than buying a Teflon pan for like triple the price and having it only last maybe a year before it gets completely ruined, and you get those forever chemicals in your body as an added bonus.

It's not like it's some huge investment, just give it a try and see if it works for you. Buy a cheap one at a big box store, season it with oil or fat, and don't put it in the dishwasher just hand rinse it with lye-free dish soap and a soft sponge. Maybe that's too much work for you and you prefer your nonstick or stainless, that's fine too, good quality stainless can last a lifetime if treated properly and ceramic nonstick pans are getting better and cheaper all the time and pretty much outcompeting PFA-based products because people are becoming more aware of how shitty they actually are.

[–] TexMexBazooka@lemm.ee 18 points 1 month ago (4 children)

My cast iron cookware exists out of survivors bias. Everything else has fallen apart in one capacity or another.

load more comments (4 replies)
[–] match@pawb.social 17 points 1 month ago (6 children)

call me lemmyml but I fucking love using a carbon steel wok to cook anything

load more comments (6 replies)
[–] chemicalprophet@lemm.ee 17 points 1 month ago

Don’t care, use carbon steel

load more comments
view more: next ›