Piracy: ꜱᴀɪʟ ᴛʜᴇ ʜɪɢʜ ꜱᴇᴀꜱ

That's the thing though: Ultimately, there is no stopping it with restrictive technology.

The only real way to stop piracy is to offer a good service for a good price.

I fly a giant fucking pirate flag with skull and crossbones and no one ever stops me. All they do is say "Are you a pirate?" or "Say Jack Sparrow". Tcchh bitch please, I'll torrent your mom's prom night.

Similar to the war on drugs.... Weird.

I get why hdcp exists, but why the fuck would apple enable it permanently, for everything? They afraid of people pirating their own desktop or something?

This is pedantic, but there are indeed capacitors there. They're all surface mount components, so they don't look like the caps that people typically talk about replacing, and they likely aren't what caused it to fail. Anything labeled on the board with a C## is likely a SMD capacitor.

I see corrosion/deposits by those two leds and the hdmi.. rinse it with vinegar, then DI water, then 90% alcohol. See if that doesn't bring it back to life once it's fully dry. You also might have to reflow the solder though.

Provided they don't explode first, ceramic capacitors tend to fail short circuit. If you have a multimeter, do continuity checks across all of them. In-circuit capacitance testing is very inaccurate, so that specific test is almost always moot. Continuity testing may help.

Also, depending on the speed of the multimeter and the charge of the capacitor, it may briefly give you a tone and/or register as a short circuit. Capacitors can register as a short circuit very briefly until they get a slight charge.

The diode at the top right is another easy thing to check. (D12 // SS34) if it's failed short, it will cause issues for you as well.

I am not sure what the component is that is under the heatsink by the USB connector. Sometimes, you may have voltage regulators stepping down the USB 5V to 3.3V. Those are easy to replace as well. However, if it is a USB controller of some kind, you would have to reference the datasheet and test it somehow.

Those are some simple checks you can do, anyway.

Then replace the magic smoke.

Good bot!