this post was submitted on 20 Oct 2025
784 points (98.0% liked)

Science Memes

17223 readers
4296 users here now

Welcome to c/science_memes @ Mander.xyz!

A place for majestic STEMLORD peacocking, as well as memes about the realities of working in a lab.



Rules

  1. Don't throw mud. Behave like an intellectual and remember the human.
  2. Keep it rooted (on topic).
  3. No spam.
  4. Infographics welcome, get schooled.

This is a science community. We use the Dawkins definition of meme.



Research Committee

Other Mander Communities

Science and Research

Biology and Life Sciences

Physical Sciences

Humanities and Social Sciences

Practical and Applied Sciences

Memes

Miscellaneous

founded 2 years ago
MODERATORS
 
top 50 comments
sorted by: hot top controversial new old
[–] psud@aussie.zone 1 points 5 days ago* (last edited 5 days ago)

4% is 4 in a hundred

75 is 3/4 of a hundred

4% of 75 is 3

[–] idegenszavak@sh.itjust.works 80 points 1 week ago* (last edited 1 week ago) (5 children)

My engineering brain says it's 3.25.

4% is ~ 5%. 10% of 75 is 7.5. To get the 5% I have to divide it by 2, so 4% of 75 is close to 3.25. I will have to multiply it with some safety coefficient at the end, so the exact value doesn't matter.

[–] psud@aussie.zone 1 points 5 days ago

Yuck. 75 is such a clean number to work with in percentages, it's 3/4 of a hundred

3/4 of 4 is then easy

[–] SatansMaggotyCumFart@piefed.world 61 points 1 week ago (3 children)

That’s why you can always double the maximum limits engineers give.

60 mph roadway?

I can do 120 on it no problem.

Eight person elevator? Sixteen.

0.08 BAC? 0.16 easy peasy.

[–] idegenszavak@sh.itjust.works 23 points 1 week ago* (last edited 1 week ago) (3 children)

Yes, in elevators usually one cable could hold far more than the full weight, then they add 5 more for the safety.

For rail speed limits this is the exact way they calculate it. For road speed limits they consider braking distance, which grows by the square of your speed, so if you go 120 on 60 road, you will need 4 times the distance to stop. I wrote 1.5 as a safety factor, not 4, With a 1.5 safety factor you can go by 75 though, but I would use a 1.1 safety there, as in my country the speed cameras are set up that way, you can go +10% of the official speed limit, they only send a cheque if you went even quicker than that.

[–] atomicbocks@sh.itjust.works 16 points 1 week ago (1 children)

That’s because elevators use counter weights usually equal to the weight of the car and half the occupancy load so that it takes less energy to lift it and if it falls for any reason it won’t hit the bottom as long as the counter weights are still attached. The occupancy load is determined by the counter weighting system not the cable load capacity.

load more comments (1 replies)
load more comments (2 replies)
[–] DancingBear@midwest.social 10 points 1 week ago (1 children)

Can I also smoke two joints before I smoke two joints, and then smoke two more?

[–] Slatlun@lemmy.ml 6 points 1 week ago (4 children)

At that point you will have smoked 4% of 100 joints. Hey, math is easy.

load more comments (4 replies)
load more comments (1 replies)
[–] saltesc@lemmy.world 20 points 1 week ago

Mine brain just does 0.75 × 4.

Thought process was...

  1. Get 1% = 0.75
  2. Double it = 1.5
  3. Double it = 3
[–] One_Honest_Dude@lemmy.world 10 points 1 week ago (1 children)

I'm confused by this statement, the answer is 3. Why do all these extra steps for a wrong answer?

[–] idegenszavak@sh.itjust.works 21 points 1 week ago (4 children)

It's not wrong, it's close enough. And the point it works with more numbers and more type of calculation. Let's calculate 4% of 1243. That's the same as 1243% of 4, right, much easier to calculate by simply changing the 2 numbers... While my method is the same, by simply rounding everything.

And in engineering you always multiply/divide your results by a 1.5 or 1.25 safety factor, depending on situation. So you don't have to calculate exact results, just close enough. E.g. G is always 10m/s2. π is only 3.14, the other digits doesn't matter.

load more comments (4 replies)
[–] zakobjoa@lemmy.world 5 points 1 week ago (1 children)

That's exactly why we have safety coefficients.

[–] IhaveCrabs111@lemmy.world 4 points 1 week ago

Safety coefficients are for nerds

[–] TheImpressiveX@lemmy.today 56 points 1 week ago (2 children)
[–] Carvex@lemmy.world 22 points 1 week ago (1 children)

One…

A-two

A-three. Three licks to the Tootsie Roll center of a Tootsie Pop.

[–] Lemminary@lemmy.world 7 points 1 week ago

You bit that, you cheated! I saw you.

[–] Cat_Daddy@hexbear.net 10 points 1 week ago* (last edited 1 week ago)

Mr. Owl would be proud

[–] ZoDoneRightNow@kbin.earth 38 points 1 week ago (1 children)

0.04 x 75 == 0.75 x 4 == 75 x 4 x 0.01

[–] berber@feddit.org 25 points 1 week ago (1 children)

switch the order of the last two terms (the second equality), put the 0.01 in the middle, and it makes a bit more sense when read as calculation steps.

0.04 * 75 = 4 * 0.01 * 75 = 4 * 0.75
load more comments (1 replies)
[–] vane@lemmy.world 30 points 1 week ago* (last edited 1 week ago) (2 children)
[–] halvar@lemy.lol 14 points 1 week ago

Formulated like this it's really obvious why the method up there works too

load more comments (1 replies)
[–] BigBenis@lemmy.world 23 points 1 week ago

That's a neat trick but also 4% of 75 = (1% of 75) * 4 = 0.75 * 4 = 1.5 * 2 = 3

[–] someacnt@sh.itjust.works 23 points 1 week ago (1 children)

Ah, joy of commutative algebra.

Wait until you get to noncommutative algebra.. shudders. No one who mastered that monster of a subject is sane in any measure.

[–] Sunrosa@lemmy.world 10 points 1 week ago (1 children)

Yay for quaternions and beyond

load more comments (1 replies)
[–] gravitas_deficiency@sh.itjust.works 18 points 1 week ago* (last edited 1 week ago) (2 children)

Is it weird that I just went

start: 75

to actual decimal: .75

*2*2: 1.5 -> 3

[–] LifeInMultipleChoice@lemmy.dbzer0.com 16 points 1 week ago (3 children)

Nah we all do weird shit. I did 4x75, then moved from 300. to 3

[–] Zulu@lemmy.world 13 points 1 week ago (1 children)

Meanwhile im the idiot thats like "uh 10% of 75 is 7.5, half it for 5% of 75 is 3.75, 1% of 75 is .75, so its probably 3?"

Lets pray thats one of the options on the multiple choice. Oh the professor wants me to show my math? Well lets hope he's open to me being an abstract dumbass that is capable of getting the right answer.

load more comments (1 replies)
load more comments (2 replies)
load more comments (1 replies)
[–] zout@fedia.io 18 points 1 week ago

I'd do 4%=1/25, 75/25=3.

[–] Soot@hexbear.net 13 points 1 week ago

(4/100) * 75 = (75/100) * 4

I actually think the mutability of expressions is an under-taught part of maths until you reach like, constructing high-level proofs. Rearranging numbers into already-understood ones is a very useful skill.

[–] Korhaka@sopuli.xyz 10 points 1 week ago (2 children)

Even the first one, 0.75 doubled and then doubled again is hard?

[–] affiliate@lemmy.world 30 points 1 week ago (3 children)

at this point in my life, as somebody with multiple math degrees, if i ever come across a situation where i need to multiply or divide numbers and one of them is bigger than 12, im going to use a calculator.

[–] darvocet@infosec.pub 9 points 1 week ago

Look at Mr big brain over here who learned his times tables. Sure hope nobody takes his lunch money.

load more comments (2 replies)
load more comments (1 replies)
[–] ivanafterall@lemmy.world 10 points 1 week ago* (last edited 1 week ago) (1 children)

I only learned this a few months ago here on Lemmy and still don't believe it. It's magic. You think you're going to "get it" (trick it) this time, but nope! Still works somehow!

[–] jumjummy@lemmy.world 6 points 1 week ago* (last edited 1 week ago)

What’s funny is that if someone said (a * b) * c is the same as (c * b) * a, you’d probably say “of course it is”.

Same trick here if you show it as (4* 1/100) * 75 rewritten as (75 * 1/100) * 4.

[–] Entropy_Pyre@lemmy.ca 9 points 1 week ago (2 children)

Why did no one ever teach me this?? Did I miss this day in class? I feel so silly. This is really useful.

[–] BanMe@lemmy.world 7 points 1 week ago

Yes and no, other day I was trying to figure out 17% of a number like 65, and I'm like "Oh it's just 65% of 17!" Which really wasn't helpful.

It works with small numbers on one side tho.

[–] TwilightKiddy@programming.dev 7 points 1 week ago

Most teachers will write it off as obvious. Taking a percentage of something is just multiplication and if you actually write it down with multiplication, it is, indeed, obvious:

4*75/100=75*4/100

And yes, it means you can just multiply 75 by 4 first and then divide by 100.

[–] Eheran@lemmy.world 9 points 1 week ago

Sure with easy numbers multiplication is easy. Try anything else.

[–] callyral@pawb.social 8 points 1 week ago (1 children)
load more comments (1 replies)
[–] Corkyskog@sh.itjust.works 8 points 1 week ago
[–] betanumerus@lemmy.ca 7 points 1 week ago* (last edited 1 week ago)

4 over 100

is

X over 75

And there's your butterfly.

[–] BigPotato@lemmy.world 7 points 1 week ago (2 children)

Yeah, this will be so helpful when I'm trying to figure out 20% of 36.23!

Look, move the decimal one to the left, you've now got 10%. Double that and you've got 20%. How often are y'all trying to find out percentages of nice even numbers like that?

load more comments (2 replies)
[–] Zerush@lemmy.ml 6 points 1 week ago* (last edited 1 week ago) (1 children)

I also remember a somewhat sinister question: Using a knife, divide 3 apples among 4 people with the less possible cuts. 💀

[–] psud@aussie.zone 2 points 5 days ago

Is that the one that goes: cut one person, give the three survivors an apple each?

load more comments
view more: next ›